Turn Signals Not Working When Stopped, Rev-Up and They Blink

ohrly? · 01-10-08, 08:43 PM

Bad Ground?

Rig of Mortis · 01-10-08, 09:50 PM

Quote:

Originally Posted by ohrly?

Bad Ground?

Yes. Get you truck oil sprayed.

ohrly? · 01-11-08, 05:32 PM

Get it oil sprayed? what is that?

canucksafari · 01-11-08, 05:51 PM

Oil sprayed to stop the rust. Its a preventative measure. First find the bad ground wire culprit where it attaches to the frame / body / engine. Clean the connector and the grounding metal around it. Spread on some electrical grease (be generous) and re-attach.

01-10-08, 08:43 PM	#1
ohrly? IH8MUD Regular Join Date: Nov 2007 Posts: 307	Turn Signals Not Working When Stopped, Rev-Up and They Blink Bad Ground?

01-11-08, 05:51 PM	#4
canucksafari IH8MUD Lifer Join Date: Dec 2006 Location: Abby Posts: 2,340	Oil sprayed to stop the rust. Its a preventative measure. First find the bad ground wire culprit where it attaches to the frame / body / engine. Clean the connector and the grounding metal around it. Spread on some electrical grease (be generous) and re-attach. __________________ John G. 姉 Join the Import Vehicle Owners Association of Canada: Fight for what is right

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

01-11-08, 05:32 PM	#3
ohrly? IH8MUD Regular Join Date: Nov 2007 Posts: 307	Get it oil sprayed? what is that?