12HT w/5speed and transfer

rutbeer · 04-05-08, 05:12 PM

12HT diesel with 5speed, transfer, shifters, fan shroud, wiring harness, air cleaner, crossmember, motor mounts, a/c, power steering, etc. Darn near everything needed to complete an FJ60 swap. Motor runs well and has been compression tested. Email me for addtional info. Motor located in North Carolina $8000.

iron_giant · 04-06-08, 01:44 PM

Would you consider selling just the engine?

cool site by the way... Import Purist

rutbeer · 04-06-08, 01:57 PM

I hadn't really considered that....I would prefer to sell the complete package to someone. I'm actually torn on selling this one anyway....I have an FJ45 that would be SWEET for this package, but I can't bring myself to cut up an original 45. I'm also considering just putting it into an FJ80 here that's very clean....I think that would be pretty sweet too.
Thanks for the compliments on the site. It's a work in process as usual. I actually have a ton of used JDM stuff that I need to find the time to take pictures of. I've accumulated quite a bit with my own conversions that I don't think I "need" anymore.

iron_giant · 04-06-08, 02:23 PM

well let me know if you change your mind. I'm dropping it into a jdm 60 so I don't need the rest. Should I inquire here as to what else you have available?

AGreekBoy · 04-24-08, 10:10 PM

how many miles are on the drivetrain . did it come from australia . i am interested can you send me some pic. anestiskalatges@bellsouth.net.

rutbeer · 04-25-08, 10:21 AM

160,000km and it's out of Japan...not Australia.

AGreekBoy · 04-25-08, 12:09 PM

where in NC are you located?

rutbeer · 04-25-08, 02:30 PM

Winston Salem

Dirk S. · 04-27-08, 09:17 AM

Is this package still available? I am interseted, though i need to sort out some logistics. Main concern is emissions and smog testing, some day in the near future I may need to register my FJ62 in California. Do you know where I could get some information on how these engines measure up to different States standards?

Thanks, Dirk

rutbeer · 04-27-08, 09:39 AM

I still have it.
As far as I know, California will let you install a motor that is newer than your vehicle without hassle. There are quite a few people on the diesel forum that have done this that live in Cali, so I know it's possible, but I don't know what forms they had to fill out, etc.

AGreekBoy · 04-28-08, 10:41 AM

what side one the motor is the slave cylinder and starter on?

rutbeer · 04-28-08, 12:08 PM

That's the beauty of the 2h and 12HT from a swap standpoint. The fuel lines, starter wires, exhaust (side) are all basically where they were on a 2F. What's different is the location of the a/c and power steering pump compared to an FJ60. If you are installing in a 40, you would have been getting power steering lines made up for you anyway, and if you are installing in a 60, there are many shops that will reuse your existing hose ends to make new ones at reasonable prices. I meant to grab photos of the 12HT while I was there this weekend, but forgot to. I'll see if I can run by there tonight and get that done.

AGreekBoy · 04-28-08, 03:39 PM

also does the turbo engine require an oil cooler or is the radiator oversized compared to the stock 60's?

rutbeer · 04-28-08, 08:40 PM

CT-26 turbos are oil cooled/lubricated and water cooled from the factory. The water lines for the turbo come off the thermostat housing. You do not need a larger radiator for this engine.

AGreekBoy · 04-29-08, 10:12 AM

can you email me some pics?

rutbeer · 05-01-08, 09:02 PM

Pics added...sorry for the delay.

AGreekBoy · 05-03-08, 09:53 AM

what is the best price you can give cash. ill come and pick it up. you are only three hours away.

rutbeer · 05-03-08, 02:38 PM

Ahh...I see why you asked about the leaks. There is a "wet" spot in two of the photos, but that's actually diesel that I spilled when I was running it and then when I disconnected the fuel lines from my test "tank".

rutbeer · 05-19-08, 08:13 PM

Still available. Package deal with PTO, take off, cable, driveshafts for $8,200 total.

AGreekBoy · 06-24-08, 08:26 PM

hey man do you still have this drivetrain?

rutbeer · 06-24-08, 09:19 PM

Yes....for now. I have a guy that has me looking for an clean FJ80 to put it in. He hasn't paid, so until money is on the table it's just talk and still available. You married yet?

AGreekBoy · 06-26-08, 04:28 PM

yup, still interested in your drivetrain. do you think you can pm me your phone # i have misplaced it. thanks

rutbeer · 07-02-08, 05:02 PM

Drivetrain is sold

04-05-08, 05:12 PM	#1
rutbeer IH8MUD Lifer Join Date: Jun 2004 Location: North Carolina Posts: 1,148	12HT w/5speed and transfer 12HT diesel with 5speed, transfer, shifters, fan shroud, wiring harness, air cleaner, crossmember, motor mounts, a/c, power steering, etc. Darn near everything needed to complete an FJ60 swap. Motor runs well and has been compression tested. Email me for addtional info. Motor located in North Carolina $8000. Attached Images __________________ 78FJ40 w/13BT diesel (BIESEL),66FJ45(MARMUT), 13BT install thread www.importpurist.com "Much like a cat or hot buttered toast, the correct side will always try to land down. If the bezel is on upside down, then the force of it trying to right itself may cause you to roll your cruiser unexpectedly." Last edited by rutbeer; 05-01-08 at 09:02 PM.

04-06-08, 01:44 PM	#2
iron_giant IH8MUD Addict Join Date: Jun 2003 Posts: 682	Would you consider selling just the engine? cool site by the way... Import Purist __________________ 1984 JDM Hj60, RHD, ARB & limited slip, high roof, Alcans, 35's, 4.56's and a whole lotta fun

04-06-08, 01:57 PM	#3
rutbeer IH8MUD Lifer Join Date: Jun 2004 Location: North Carolina Posts: 1,148	I hadn't really considered that....I would prefer to sell the complete package to someone. I'm actually torn on selling this one anyway....I have an FJ45 that would be SWEET for this package, but I can't bring myself to cut up an original 45. I'm also considering just putting it into an FJ80 here that's very clean....I think that would be pretty sweet too. Thanks for the compliments on the site. It's a work in process as usual. I actually have a ton of used JDM stuff that I need to find the time to take pictures of. I've accumulated quite a bit with my own conversions that I don't think I "need" anymore. __________________ 78FJ40 w/13BT diesel (BIESEL),66FJ45(MARMUT), 13BT install thread www.importpurist.com "Much like a cat or hot buttered toast, the correct side will always try to land down. If the bezel is on upside down, then the force of it trying to right itself may cause you to roll your cruiser unexpectedly."

04-06-08, 02:23 PM	#4
iron_giant IH8MUD Addict Join Date: Jun 2003 Posts: 682	well let me know if you change your mind. I'm dropping it into a jdm 60 so I don't need the rest. Should I inquire here as to what else you have available? __________________ 1984 JDM Hj60, RHD, ARB & limited slip, high roof, Alcans, 35's, 4.56's and a whole lotta fun

04-25-08, 10:21 AM	#6
rutbeer IH8MUD Lifer Join Date: Jun 2004 Location: North Carolina Posts: 1,148	160,000km and it's out of Japan...not Australia. __________________ 78FJ40 w/13BT diesel (BIESEL),66FJ45(MARMUT), 13BT install thread www.importpurist.com "Much like a cat or hot buttered toast, the correct side will always try to land down. If the bezel is on upside down, then the force of it trying to right itself may cause you to roll your cruiser unexpectedly."

04-24-08, 10:10 PM	#5
AGreekBoy IH8MUD Regular Join Date: Mar 2008 Location: south carolina TLCA# 18699 Posts: 426	how many miles are on the drivetrain . did it come from australia . i am interested can you send me some pic. anestiskalatges@bellsouth.net.

04-25-08, 12:09 PM	#7
AGreekBoy IH8MUD Regular Join Date: Mar 2008 Location: south carolina TLCA# 18699 Posts: 426	where in NC are you located?

04-25-08, 02:30 PM	#8
rutbeer IH8MUD Lifer Join Date: Jun 2004 Location: North Carolina Posts: 1,148	Winston Salem __________________ 78FJ40 w/13BT diesel (BIESEL),66FJ45(MARMUT), 13BT install thread www.importpurist.com "Much like a cat or hot buttered toast, the correct side will always try to land down. If the bezel is on upside down, then the force of it trying to right itself may cause you to roll your cruiser unexpectedly."

04-27-08, 09:17 AM	#9
Dirk S. IH8MUD Rookie Join Date: Feb 2008 Location: Wherever the boss wants his boat stationed Posts: 12	Is this package still available? I am interseted, though i need to sort out some logistics. Main concern is emissions and smog testing, some day in the near future I may need to register my FJ62 in California. Do you know where I could get some information on how these engines measure up to different States standards? Thanks, Dirk

04-27-08, 09:39 AM	#10
rutbeer IH8MUD Lifer Join Date: Jun 2004 Location: North Carolina Posts: 1,148	I still have it. As far as I know, California will let you install a motor that is newer than your vehicle without hassle. There are quite a few people on the diesel forum that have done this that live in Cali, so I know it's possible, but I don't know what forms they had to fill out, etc. __________________ 78FJ40 w/13BT diesel (BIESEL),66FJ45(MARMUT), 13BT install thread www.importpurist.com "Much like a cat or hot buttered toast, the correct side will always try to land down. If the bezel is on upside down, then the force of it trying to right itself may cause you to roll your cruiser unexpectedly."

04-28-08, 10:41 AM	#11
AGreekBoy IH8MUD Regular Join Date: Mar 2008 Location: south carolina TLCA# 18699 Posts: 426	what side one the motor is the slave cylinder and starter on?

04-28-08, 12:08 PM	#12
rutbeer IH8MUD Lifer Join Date: Jun 2004 Location: North Carolina Posts: 1,148	That's the beauty of the 2h and 12HT from a swap standpoint. The fuel lines, starter wires, exhaust (side) are all basically where they were on a 2F. What's different is the location of the a/c and power steering pump compared to an FJ60. If you are installing in a 40, you would have been getting power steering lines made up for you anyway, and if you are installing in a 60, there are many shops that will reuse your existing hose ends to make new ones at reasonable prices. I meant to grab photos of the 12HT while I was there this weekend, but forgot to. I'll see if I can run by there tonight and get that done. __________________ 78FJ40 w/13BT diesel (BIESEL),66FJ45(MARMUT), 13BT install thread www.importpurist.com "Much like a cat or hot buttered toast, the correct side will always try to land down. If the bezel is on upside down, then the force of it trying to right itself may cause you to roll your cruiser unexpectedly." Last edited by rutbeer; 04-28-08 at 12:09 PM. Reason: typo

04-28-08, 03:39 PM	#13
AGreekBoy IH8MUD Regular Join Date: Mar 2008 Location: south carolina TLCA# 18699 Posts: 426	also does the turbo engine require an oil cooler or is the radiator oversized compared to the stock 60's?

04-28-08, 08:40 PM	#14
rutbeer IH8MUD Lifer Join Date: Jun 2004 Location: North Carolina Posts: 1,148	CT-26 turbos are oil cooled/lubricated and water cooled from the factory. The water lines for the turbo come off the thermostat housing. You do not need a larger radiator for this engine. __________________ 78FJ40 w/13BT diesel (BIESEL),66FJ45(MARMUT), 13BT install thread www.importpurist.com "Much like a cat or hot buttered toast, the correct side will always try to land down. If the bezel is on upside down, then the force of it trying to right itself may cause you to roll your cruiser unexpectedly."

04-29-08, 10:12 AM	#15
AGreekBoy IH8MUD Regular Join Date: Mar 2008 Location: south carolina TLCA# 18699 Posts: 426	can you email me some pics?

05-01-08, 09:02 PM	#16
rutbeer IH8MUD Lifer Join Date: Jun 2004 Location: North Carolina Posts: 1,148	Pics added...sorry for the delay. __________________ 78FJ40 w/13BT diesel (BIESEL),66FJ45(MARMUT), 13BT install thread www.importpurist.com "Much like a cat or hot buttered toast, the correct side will always try to land down. If the bezel is on upside down, then the force of it trying to right itself may cause you to roll your cruiser unexpectedly."

05-03-08, 09:53 AM	#17
AGreekBoy IH8MUD Regular Join Date: Mar 2008 Location: south carolina TLCA# 18699 Posts: 426	what is the best price you can give cash. ill come and pick it up. you are only three hours away.

05-03-08, 02:38 PM	#18
rutbeer IH8MUD Lifer Join Date: Jun 2004 Location: North Carolina Posts: 1,148	Ahh...I see why you asked about the leaks. There is a "wet" spot in two of the photos, but that's actually diesel that I spilled when I was running it and then when I disconnected the fuel lines from my test "tank". __________________ 78FJ40 w/13BT diesel (BIESEL),66FJ45(MARMUT), 13BT install thread www.importpurist.com "Much like a cat or hot buttered toast, the correct side will always try to land down. If the bezel is on upside down, then the force of it trying to right itself may cause you to roll your cruiser unexpectedly."

05-19-08, 08:13 PM	#19
rutbeer IH8MUD Lifer Join Date: Jun 2004 Location: North Carolina Posts: 1,148	Still available. Package deal with PTO, take off, cable, driveshafts for $8,200 total. __________________ 78FJ40 w/13BT diesel (BIESEL),66FJ45(MARMUT), 13BT install thread www.importpurist.com "Much like a cat or hot buttered toast, the correct side will always try to land down. If the bezel is on upside down, then the force of it trying to right itself may cause you to roll your cruiser unexpectedly."

06-24-08, 08:26 PM	#20
AGreekBoy IH8MUD Regular Join Date: Mar 2008 Location: south carolina TLCA# 18699 Posts: 426	hey man do you still have this drivetrain?

06-24-08, 09:19 PM	#21
rutbeer IH8MUD Lifer Join Date: Jun 2004 Location: North Carolina Posts: 1,148	Yes....for now. I have a guy that has me looking for an clean FJ80 to put it in. He hasn't paid, so until money is on the table it's just talk and still available. You married yet? __________________ 78FJ40 w/13BT diesel (BIESEL),66FJ45(MARMUT), 13BT install thread www.importpurist.com "Much like a cat or hot buttered toast, the correct side will always try to land down. If the bezel is on upside down, then the force of it trying to right itself may cause you to roll your cruiser unexpectedly."

06-26-08, 04:28 PM	#22
AGreekBoy IH8MUD Regular Join Date: Mar 2008 Location: south carolina TLCA# 18699 Posts: 426	yup, still interested in your drivetrain. do you think you can pm me your phone # i have misplaced it. thanks

07-02-08, 05:02 PM	#23
rutbeer IH8MUD Lifer Join Date: Jun 2004 Location: North Carolina Posts: 1,148	Drivetrain is sold __________________ 78FJ40 w/13BT diesel (BIESEL),66FJ45(MARMUT), 13BT install thread www.importpurist.com "Much like a cat or hot buttered toast, the correct side will always try to land down. If the bezel is on upside down, then the force of it trying to right itself may cause you to roll your cruiser unexpectedly."

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode