13BT w/5spd transfer, and supra turbo

rutbeer · 04-05-08, 05:06 PM

I finally got around to testing this 13BT I have. Compression numbers are very good and this is the smoothest running 13 I have ever had. In the process of running it today, I noticed that it has been upgraded with a custom ct-26 turbo instead of the standard (smaller turbine) CT-26 that comes on the 13's. Drivetrain is located in North Carolina. Complete drivetain with some nice additional components like shroud, air cleaner, motor mounts, etc. Email me for a photo, or additional info. $5,500 THIS ITEM IS SOLD

owenjam · 04-08-08, 11:21 AM

Would you take any less??? Maybe post some pics. Thanks

rutbeer · 04-08-08, 11:37 AM

Quote:

Originally Posted by owenjam

Would you take any less??? Maybe post some pics. Thanks

That would depend on your offer, whether or not you were picking it up in person, and if you were bundling this with anything else I'm selling. Why don't you PM me....my email through mud is getting spammed to death right now, so don't email unless it's through my website.

owenjam · 04-08-08, 12:54 PM

So this is a 24v system, any reason why I cant just remove the 24v alternator and use a 12v?? Already have a 3B, 5speed, and t case. Want another one already!!!!

Thanks,

rutbeer · 04-08-08, 02:03 PM

It is 24V. I put a 12V alt on mine and replaced the starter motor with a 12v one from a minitruck diesel. You don't have to wire up the glow screen....I am not using mine, but I know others have gotten by with wiring up one half the glow screen with 12v.

rutbeer · 04-10-08, 10:20 AM

I need to put this item on hold until I can properly identify the turbo that's on it. I will post it up for sale again when I have complete information on it's origin.

owenjam · 04-10-08, 01:49 PM

NO PROBLEM.

rutbeer · 04-20-08, 08:02 PM

Back up. The exhaust pipe shown is no longer included. I'm putting my cast iron dump bell on it, and a stubby downpipe for you to fab your own exhaust.

american psycho · 04-21-08, 09:07 AM

what are the compression numbers?

rutbeer · 04-21-08, 09:46 AM

It was 400psi across the board with a stone cold motor that had been sitting for a minimum of 6 months prior to starting. My own motor was at 410 cold, but having been run within a day or so prior.

notyourmomslx450 · 04-22-08, 09:47 AM

is this engine the type that would be good in an 80 series, or would it work in a hilux?

rutbeer · 04-22-08, 11:30 AM

They have been put in a 60 series before, but I would think it to be a bit underpowered for an 80. I also have a 12HT, which would be a much better fit....especially with turbo fiddling.
I just shimmed the wastegate on my 13bt in 15 minutes and had a noticable increase in upper end power.
A 13bt would be a monster in a hilux....don't those weigh less than a 40?

rutbeer · 04-25-08, 02:30 PM

Deal pending

rutbeer · 05-02-08, 03:45 PM

Deal fell through....back up for sale.

rutbeer · 05-19-08, 08:11 PM

Still have it. winch sold, no package deal available anymore.

rutbeer · 07-02-08, 05:05 PM

Still for sale....12HT just sold. Somebody else is going bio!

rutbeer · 07-14-08, 03:41 PM

updated description and price

RufusTheDufus · 07-21-08, 08:57 PM

Does the 13b-t require a computer for the injection system? If so is that included with the drievetrain?

rutbeer · 07-21-08, 09:20 PM

Quote:

Originally Posted by RufusTheDufus

Does the 13b-t require a computer for the injection system? If so is that included with the drievetrain?

No, it doesn't use a computer....and thank your lucky stars for that. It makes them very simple to install and work on. You have starter leads, starter solenoid wire, alt wires, and then one wire to the fuel cut.....but you can actually do that by hand cable. If you choose to use the glow screen and a/c, that's another two wires. Really very easy to wire up. The biggest hurdle you will have is deciding whether to keep it 24v or go to 12v. I went to 12v because 24 is uncommon around here and my truck was already 12.

RufusTheDufus · 07-21-08, 10:35 PM

Thanks for the clarification. PM sent.

prado t · 07-29-08, 02:00 PM

That combo would be awesome for your 40

RufusTheDufus · 07-29-08, 02:04 PM

I'm thinking about it for my 45. Just have to wait for the 45 to get here and be sure it's not a complete basket case before committing to an engine for it. If the body is good I'm planning to buy this drivetrain if it's still available.

jake2far · 08-02-08, 01:28 PM

Please email me at jake2far@hotmail.com, I would like to make an offer for your engine. Thank you. Jim jake2far@hotmail.com

rutbeer · 08-22-08, 12:43 PM

Engine is SOLD. Thanks!

04-05-08, 05:06 PM	#1
rutbeer IH8MUD Lifer Join Date: Jun 2004 Location: North Carolina Posts: 1,148	13BT w/5spd transfer, and supra turbo I finally got around to testing this 13BT I have. Compression numbers are very good and this is the smoothest running 13 I have ever had. In the process of running it today, I noticed that it has been upgraded with a custom ct-26 turbo instead of the standard (smaller turbine) CT-26 that comes on the 13's. Drivetrain is located in North Carolina. Complete drivetain with some nice additional components like shroud, air cleaner, motor mounts, etc. Email me for a photo, or additional info. $5,500 THIS ITEM IS SOLD __________________ 78FJ40 w/13BT diesel (BIESEL),66FJ45(MARMUT), 13BT install thread www.importpurist.com "Much like a cat or hot buttered toast, the correct side will always try to land down. If the bezel is on upside down, then the force of it trying to right itself may cause you to roll your cruiser unexpectedly." Last edited by rutbeer; 08-22-08 at 12:44 PM. Reason: SOLD

04-08-08, 11:21 AM	#2
owenjam IH8MUD Junior Join Date: Jan 2008 Location: Birmingham, Alabama TLCA# 18952 Posts: 185	Would you take any less??? Maybe post some pics. Thanks __________________ 1983 FJ60 soon to burn diesel, 3B Turbo, 5 speed 2005 Kubota RTV900 4x4 Utility Truck, 3cyl Diesel 1999 Lexus LX 470, Wife daily, Guzzler...... 1985 Mercedes 300D Turbo Diesel 40+ Other cars & trucks All for sale!!!! www.trucksplusinc.com

04-08-08, 12:54 PM	#4
owenjam IH8MUD Junior Join Date: Jan 2008 Location: Birmingham, Alabama TLCA# 18952 Posts: 185	So this is a 24v system, any reason why I cant just remove the 24v alternator and use a 12v?? Already have a 3B, 5speed, and t case. Want another one already!!!! Thanks, __________________ 1983 FJ60 soon to burn diesel, 3B Turbo, 5 speed 2005 Kubota RTV900 4x4 Utility Truck, 3cyl Diesel 1999 Lexus LX 470, Wife daily, Guzzler...... 1985 Mercedes 300D Turbo Diesel 40+ Other cars & trucks All for sale!!!! www.trucksplusinc.com

04-08-08, 02:03 PM	#5
rutbeer IH8MUD Lifer Join Date: Jun 2004 Location: North Carolina Posts: 1,148	It is 24V. I put a 12V alt on mine and replaced the starter motor with a 12v one from a minitruck diesel. You don't have to wire up the glow screen....I am not using mine, but I know others have gotten by with wiring up one half the glow screen with 12v. __________________ 78FJ40 w/13BT diesel (BIESEL),66FJ45(MARMUT), 13BT install thread www.importpurist.com "Much like a cat or hot buttered toast, the correct side will always try to land down. If the bezel is on upside down, then the force of it trying to right itself may cause you to roll your cruiser unexpectedly."

04-10-08, 10:20 AM	#6
rutbeer IH8MUD Lifer Join Date: Jun 2004 Location: North Carolina Posts: 1,148	I need to put this item on hold until I can properly identify the turbo that's on it. I will post it up for sale again when I have complete information on it's origin. __________________ 78FJ40 w/13BT diesel (BIESEL),66FJ45(MARMUT), 13BT install thread www.importpurist.com "Much like a cat or hot buttered toast, the correct side will always try to land down. If the bezel is on upside down, then the force of it trying to right itself may cause you to roll your cruiser unexpectedly."

04-10-08, 01:49 PM	#7
owenjam IH8MUD Junior Join Date: Jan 2008 Location: Birmingham, Alabama TLCA# 18952 Posts: 185	NO PROBLEM. __________________ 1983 FJ60 soon to burn diesel, 3B Turbo, 5 speed 2005 Kubota RTV900 4x4 Utility Truck, 3cyl Diesel 1999 Lexus LX 470, Wife daily, Guzzler...... 1985 Mercedes 300D Turbo Diesel 40+ Other cars & trucks All for sale!!!! www.trucksplusinc.com

04-20-08, 08:02 PM	#8
rutbeer IH8MUD Lifer Join Date: Jun 2004 Location: North Carolina Posts: 1,148	Back up. The exhaust pipe shown is no longer included. I'm putting my cast iron dump bell on it, and a stubby downpipe for you to fab your own exhaust. __________________ 78FJ40 w/13BT diesel (BIESEL),66FJ45(MARMUT), 13BT install thread www.importpurist.com "Much like a cat or hot buttered toast, the correct side will always try to land down. If the bezel is on upside down, then the force of it trying to right itself may cause you to roll your cruiser unexpectedly."

04-21-08, 09:07 AM	#9
american psycho IH8MUD Junior Join Date: Oct 2007 Location: switzerland Posts: 198	what are the compression numbers? __________________ just did it! american psycho

04-21-08, 09:46 AM	#10
rutbeer IH8MUD Lifer Join Date: Jun 2004 Location: North Carolina Posts: 1,148	It was 400psi across the board with a stone cold motor that had been sitting for a minimum of 6 months prior to starting. My own motor was at 410 cold, but having been run within a day or so prior. __________________ 78FJ40 w/13BT diesel (BIESEL),66FJ45(MARMUT), 13BT install thread www.importpurist.com "Much like a cat or hot buttered toast, the correct side will always try to land down. If the bezel is on upside down, then the force of it trying to right itself may cause you to roll your cruiser unexpectedly."

04-22-08, 09:47 AM	#11
notyourmomslx450 Nada Join Date: Jan 2006 Location: Houston, TX TLCA# 17268 Posts: 821	is this engine the type that would be good in an 80 series, or would it work in a hilux? __________________ -Jason '85 4Runner- Geared, locked, bobbed, tired, fun. '97 LX 450- It's a little wet right now. Still big. '94 Xtra Cab P/U - 5.29s & Detroits F/R, SAS, Marlin Hysteer, 30 spline Longfield birfs and axleshafts, chromo hub gears, dual cases (2.28/4.7) w/ 10* rotated adapter, FROR dual rotated case xmember/skid, 12 " Bob, 37" MT/Rs "I got the J==p thing, and now it burns when I pee."

04-22-08, 11:30 AM	#12
rutbeer IH8MUD Lifer Join Date: Jun 2004 Location: North Carolina Posts: 1,148	They have been put in a 60 series before, but I would think it to be a bit underpowered for an 80. I also have a 12HT, which would be a much better fit....especially with turbo fiddling. I just shimmed the wastegate on my 13bt in 15 minutes and had a noticable increase in upper end power. A 13bt would be a monster in a hilux....don't those weigh less than a 40? __________________ 78FJ40 w/13BT diesel (BIESEL),66FJ45(MARMUT), 13BT install thread www.importpurist.com "Much like a cat or hot buttered toast, the correct side will always try to land down. If the bezel is on upside down, then the force of it trying to right itself may cause you to roll your cruiser unexpectedly."

04-25-08, 02:30 PM	#13
rutbeer IH8MUD Lifer Join Date: Jun 2004 Location: North Carolina Posts: 1,148	Deal pending __________________ 78FJ40 w/13BT diesel (BIESEL),66FJ45(MARMUT), 13BT install thread www.importpurist.com "Much like a cat or hot buttered toast, the correct side will always try to land down. If the bezel is on upside down, then the force of it trying to right itself may cause you to roll your cruiser unexpectedly."

05-02-08, 03:45 PM	#14
rutbeer IH8MUD Lifer Join Date: Jun 2004 Location: North Carolina Posts: 1,148	Deal fell through....back up for sale. __________________ 78FJ40 w/13BT diesel (BIESEL),66FJ45(MARMUT), 13BT install thread www.importpurist.com "Much like a cat or hot buttered toast, the correct side will always try to land down. If the bezel is on upside down, then the force of it trying to right itself may cause you to roll your cruiser unexpectedly."

05-19-08, 08:11 PM	#15
rutbeer IH8MUD Lifer Join Date: Jun 2004 Location: North Carolina Posts: 1,148	Still have it. winch sold, no package deal available anymore. __________________ 78FJ40 w/13BT diesel (BIESEL),66FJ45(MARMUT), 13BT install thread www.importpurist.com "Much like a cat or hot buttered toast, the correct side will always try to land down. If the bezel is on upside down, then the force of it trying to right itself may cause you to roll your cruiser unexpectedly." Last edited by rutbeer; 07-02-08 at 05:05 PM.

07-02-08, 05:05 PM	#16
rutbeer IH8MUD Lifer Join Date: Jun 2004 Location: North Carolina Posts: 1,148	Still for sale....12HT just sold. Somebody else is going bio! __________________ 78FJ40 w/13BT diesel (BIESEL),66FJ45(MARMUT), 13BT install thread www.importpurist.com "Much like a cat or hot buttered toast, the correct side will always try to land down. If the bezel is on upside down, then the force of it trying to right itself may cause you to roll your cruiser unexpectedly."

07-29-08, 02:00 PM	#21
prado t IH8MUD Addict Join Date: Mar 2007 Location: vancouver B.C. Canada TLCA# 17424 Posts: 878	That combo would be awesome for your 40 __________________ 2.5 OME Heavy coils, ARB rear locker PRADO STOLEN 89 BJ74 ARB lockers front and rear 4" ZEAL lift, 24v M8000 winch ARB bull bar, Marks 108 to 1 HI 305 to 1 low

07-14-08, 03:41 PM	#17
rutbeer IH8MUD Lifer Join Date: Jun 2004 Location: North Carolina Posts: 1,148	updated description and price __________________ 78FJ40 w/13BT diesel (BIESEL),66FJ45(MARMUT), 13BT install thread www.importpurist.com "Much like a cat or hot buttered toast, the correct side will always try to land down. If the bezel is on upside down, then the force of it trying to right itself may cause you to roll your cruiser unexpectedly."

07-21-08, 08:57 PM	#18
RufusTheDufus IH8MUD Regular Join Date: Jan 2008 Location: Maine Posts: 289	Does the 13b-t require a computer for the injection system? If so is that included with the drievetrain?

07-21-08, 10:35 PM	#20
RufusTheDufus IH8MUD Regular Join Date: Jan 2008 Location: Maine Posts: 289	Thanks for the clarification. PM sent.

07-29-08, 02:04 PM	#22
RufusTheDufus IH8MUD Regular Join Date: Jan 2008 Location: Maine Posts: 289	I'm thinking about it for my 45. Just have to wait for the 45 to get here and be sure it's not a complete basket case before committing to an engine for it. If the body is good I'm planning to buy this drivetrain if it's still available.

08-02-08, 01:28 PM	#23
jake2far IH8MUD Rookie Join Date: Feb 2007 Posts: 47	Please email me at jake2far@hotmail.com, I would like to make an offer for your engine. Thank you. Jim jake2far@hotmail.com

08-22-08, 12:43 PM	#24
rutbeer IH8MUD Lifer Join Date: Jun 2004 Location: North Carolina Posts: 1,148	Engine is SOLD. Thanks! __________________ 78FJ40 w/13BT diesel (BIESEL),66FJ45(MARMUT), 13BT install thread www.importpurist.com "Much like a cat or hot buttered toast, the correct side will always try to land down. If the bezel is on upside down, then the force of it trying to right itself may cause you to roll your cruiser unexpectedly."

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode