1HZ parts needed

lynchmob · 10-21-07, 12:38 AM

Im looking for the following for a 1HZ from a HZJ79 .

Im sure the parts are somewhat universal for other 1HZ equiped cruisers.

A/C tensioner
PS pump reservior
Lower alternator bracket
Exhaust manifold shield

And an oil dipstick - there are three different 1HZ parts from toyota so I still need to figure out the year.

Thanks

lynchmob · 10-22-07, 11:55 AM

Thanks Rick,

I got the main part of the ac bracket from g&s, but I need the tensioner.

Reservoir = $200 from ENS

No luck on the lower mount from g&s

Shield is $119 from ENS

Was looking for used sources for any of this stuff. Ill go to the dealer if I have to. I need to get EPC running first.

kevinmrowland · 10-25-07, 07:05 AM

I am pretty sure that the AC tensioner is the same component as the 3FE one, I will check.

I also think that one of the either NA cruisers top alt bracket swaps over, I will look to see if it was a 60 or 62.

ENS helped me out with the year on my engine by looking at the serial number on the head.
They do not have an index, but they are able to chronologically place the number between other known engines.

Sheldon also helped narrow it down by the low oil sensor and the style of plug on the water temp sensor, but I think that was only for pre or post 95.

exmodlad · 10-28-07, 04:22 AM

Quote:

Originally Posted by lynchmob

Thanks Rick,

I got the main part of the ac bracket from g&s, but I need the tensioner.

Reservoir = $200 from ENS

No luck on the lower mount from g&s

Shield is $119 from ENS

Was looking for used sources for any of this stuff. Ill go to the dealer if I have to. I need to get EPC running first.

if the reservoir looks like this Chris i have one

Best Regards

Gord

Japan4X4 · 10-31-07, 11:36 AM

Doodlly dooo.....

I was just looking, not doing anything else.....

lynchmob · 11-01-07, 01:18 AM

What gives rick? I could have used those part numbers.... I didnt copy them from your post. I mentioned the prices from ENS because a standard response I get is "check with ens"

Thanks gord. 1HZ is different. I could probably adapt something with a remote res from the junkyard or from a 70 series, but I would try to work with the one I have before doing that.

Japan4x - I emailed you

10-21-07, 12:38 AM	#1
lynchmob Diesel Trucker Join Date: Mar 2007 Location: Portland OR - USA Posts: 1,023	1HZ parts needed Im looking for the following for a 1HZ from a HZJ79 . Im sure the parts are somewhat universal for other 1HZ equiped cruisers. A/C tensioner PS pump reservior Lower alternator bracket Exhaust manifold shield And an oil dipstick - there are three different 1HZ parts from toyota so I still need to figure out the year. Thanks Last edited by lynchmob; 10-21-07 at 12:06 PM.

10-25-07, 07:05 AM	#3
kevinmrowland IH8MUD Lifer Join Date: Sep 2005 Location: Scottsville, NY TLCA# 14896 Posts: 1,251	I am pretty sure that the AC tensioner is the same component as the 3FE one, I will check. I also think that one of the either NA cruisers top alt bracket swaps over, I will look to see if it was a 60 or 62. ENS helped me out with the year on my engine by looking at the serial number on the head. They do not have an index, but they are able to chronologically place the number between other known engines. Sheldon also helped narrow it down by the low oil sensor and the style of plug on the water temp sensor, but I think that was only for pre or post 95. __________________ 1985HZJ60 ROTW WagonGear

10-31-07, 11:36 AM	#5
Japan4X4 IH8MUD Addict Join Date: Mar 2006 Location: Hyogo Japan Posts: 517	Doodlly dooo..... I was just looking, not doing anything else..... __________________ Importer and distributor

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

10-22-07, 11:55 AM	#2
lynchmob Diesel Trucker Join Date: Mar 2007 Location: Portland OR - USA Posts: 1,023	Thanks Rick, I got the main part of the ac bracket from g&s, but I need the tensioner. Reservoir = $200 from ENS No luck on the lower mount from g&s Shield is $119 from ENS Was looking for used sources for any of this stuff. Ill go to the dealer if I have to. I need to get EPC running first.

11-01-07, 01:18 AM	#6
lynchmob Diesel Trucker Join Date: Mar 2007 Location: Portland OR - USA Posts: 1,023	What gives rick? I could have used those part numbers.... I didnt copy them from your post. I mentioned the prices from ENS because a standard response I get is "check with ens" Thanks gord. 1HZ is different. I could probably adapt something with a remote res from the junkyard or from a 70 series, but I would try to work with the one I have before doing that. Japan4x - I emailed you