For Sale / Wanted Thread - Page 3

Man Jerk · 03-14-07, 08:25 AM

The 4 speed and the Housing are spoken for as of now.

Isotel · 03-24-07, 04:53 PM

Wanted - 16" toyota 6 lug wheels..

Isotel · 03-28-07, 10:29 AM

I needed a passenger door for my truck, and the seller wanted to sell both at once.. Drivers door is in good shape, but it will need the bottom patch panel from CCOT due to the rust on the bottom edge. $100 i think it cost..

Id like to get $100 for the door..

88chevota · 03-30-07, 10:17 AM

My wife really wants an FJ80. 1992-1997. Any one seen one for sale lately?

1996 Nissan Pathfinder LE 4x4. Fully loaded white exterior and grey leather interior. Very clean and well taken care of. No Rust! Seat warmers, power windows, door locks, Sony cd player with AUX input on the front for an IPod or MP3 player. 140,000 miles. Runs great! Cracked windshield, but I can fix it if it makes a difference. Tinted windows. will takes pictures by next week. $6500 OBO.

Not sure if any one would consider, but willing to trade and make up the difference if needed and depending on it's condition and year.

Tony

88chevota · 03-30-07, 07:19 PM

I am looking for a set of 35" in tires. some kind of mudd terrain. My BFG's are getting worn out. they need to fit 15" rims. Anyone have some tires they want/need to get rid of???

ianacole · 04-07-07, 08:28 PM

I could really use some 40 heater parts - the two defrost ducts and the main air duct. If anyone has a serviceable set, please call me at 720.270.2147 ASAP.

Thanks!!

Ian

ssmathis · 05-07-07, 03:15 PM

No affiliation but thought I'd post for the 80 guys...

http://denver.craigslist.org/pts/325734665.html

EricG · 05-07-07, 08:13 PM

Quote:

Originally Posted by ssmathis

No affiliation but thought I'd post for the 80 guys...

http://denver.craigslist.org/pts/325734665.html

Damn ... gone already.

EricG · 05-09-07, 07:53 PM

Another 80 series ARB on craigslist
http://cosprings.craigslist.org/pts/327840855.html

He say's make an offer - when I called he said he was expecting about $600. Still a decent deal, but I'm spending to much $$$ lately.

And here's the truck it came off of - $12,750 with 130K and no mention of lockers sounds pretty optomistic.

http://cosprings.craigslist.org/car/327815916.html

EricG · 05-11-07, 09:12 AM

Quote:

Originally Posted by EricG

Anybody have a set of wheels & tires (condition unimportant) that will fit an 80 that I could borrow for a few weeks or buy cheap? I'll give you dibs on an 80 I may be parting (after I get the axles!)

Ok, looks like I just need tires now, but I needs them ASAP! Probably going to get the truck tomorrow or Sunday. Preferably smaller, to keep a lower profile/CG on the trailer. If not, I'll be hitting up a local used tire place.

Man Jerk · 05-11-07, 10:24 AM

I've got 3 sitting in the garage.

EricG · 05-11-07, 12:10 PM

Quote:

Originally Posted by Man Jerk

I've got 3 sitting in the garage.

Just tires or complete wheels + tires?
What do you want for them?

Isotel · 05-11-07, 12:59 PM

Will 15"ers fit on that FZJ?? Ive got a full set of those!

EricG · 05-11-07, 02:24 PM

Quote:

Originally Posted by Isotel

Will 15"ers fit on that FZJ?? Ive got a full set of those!

Dunno - 91-92 came with 15", if the lug pattern is the same, why not?

Man Jerk · 05-11-07, 04:20 PM

Tires and rims. I don't want nuthin for em.

But it's only 3 of em.

719-433-4658.

EricG · 05-13-07, 09:30 AM

Parting out a wrecked 93 - grey exterior, grey leather exterior.
This truck has NO drivetrain - engine/tranny/transfer/driveshafts/axles/wheels all gone or accounted for. All the lights are either broken or accounted for.

What's left:
DS front door
DS rear door could probably be made servicable
PS front & rear doors
PS fender
Tail & lift gates
stock springs
trailer hitch
hood - not obviously damaged, but may be twisted/bowed. Everything else is to crooked to tell.
Most stuff in the dash & firewall area is probably there and good.
Haven't taken a good look at the seats yet - drivers seet is badly cracked. It has 3rd row seats.

You guys have got first dibs, then I'll post it on the main for-sale board. I need to get this rig gone ASAP before he neighbors complain!

Isotel · 05-16-07, 03:55 PM

Im looking for a Garage/ House to rent, Preferably on the South/West side of town..

Garage is most important, the larger the better.. House i could care less about, but 2 bedrooms, and a fenced yard would be cool for the Dog

PM me if you know of anything.. Id also be up for renting a seperate large garage/shop to split the bill with my buddies, and getting a smaller house

Trevor

ssmathis · 05-22-07, 02:44 PM

No affiliation but I wish I had $1300 sitting around. An 85 4Runner if anyone is interested.

Scoot

http://denver.craigslist.org/car/335709182.html

88chevota · 06-16-07, 08:44 PM

I posted this on the main ih8mud site and thought oops I should have posted it here first to give you guys first chance

I have a pair of the rare FJ62 cable locking axles I am looking to sell. I have cables and indicator lights for them(not OEM). The front has OEM disc brakes and the rear full float has a GM disc brake conversion kit on it. They are set up for the stock spring under set up. They have approx. under 100k miles on them. I am asking $3500 OBO for the pair. They are complete, ready to go and in great working order.

I also have an advance adapters unit that mates a 2wd 700R4 to a 19spline LC t-case. aluminum housing, spud shaft, and tranny mount. asking $600 OBO for all of it.

I also have a 83 LC t-case that can go right along with the adapter. I have set it up for twin stick, bearings are good and I replaced all the seals. asking $300 obo for it.

I do have the 700R4 to go with the above two, but it needs a rebuild. make an offer. I have no idea what it's worth for a core. If you buy the adapter and T-case for $900 you can have the tranny.

Oh I also have the B&M shifter for it and a tranny cooler. $80 for both obo

That's all for now....I think

Tony

Man Jerk · 06-18-07, 10:40 AM

Wanted:

1 35 x 12.5 x 15 BFG MT.

Isotel · 06-18-07, 02:25 PM

Wanted: 17" wheels - 6 lug wheel spacers

For Sale: worn out 35" MTR's on rock rashed aloy wheels..

15x8" wheels - Ultra Alloy 160's Bead blasted and Clear coated
http://www.ultrawheel.com/wheel_deta...?brand=1&id=45

Man Jerk · 06-18-07, 03:02 PM

How much for the wheels?

I might have a set of 4 1.5" spacers I might be willing to trade...brand new

Man Jerk · 06-19-07, 09:26 AM

Quote:

Originally Posted by Man Jerk

Wanted:

1 35 x 12.5 x 15 BFG MT.

TTT

One of my tires will no longer hold air, so the wagon is pretty much sitting in the garage till I find a suitable replacement.

Uncle Ben · 06-19-07, 09:39 AM

Quote:

Originally Posted by Man Jerk

TTT

One of my tires will no longer hold air, so the wagon is pretty much sitting in the garage till I find a suitable replacement.

I think I might have a worn AT if ya need a temp....

Man Jerk · 06-19-07, 09:52 AM

Quote:

Originally Posted by Uncle Ben

I think I might have a worn AT if ya need a temp....

I think I'm going to try to hold out for an MT. Not like I go wheeling ever anyway.

I do have a spare but it has been patched and I don't trust it too much, although I have used it with good results.

Thank you for the offer though.

Man Jerk · 06-20-07, 12:53 PM

Jim Beedon is the MAN!! Thanks for the tires bro

88chevota · 06-20-07, 08:37 PM

sold the axles! still have the other stuff.

advance adapters unit that mates a 2wd 700R4 to a 19spline LC t-case. aluminum housing, spud shaft, and tranny mount. asking $600 OBO for all of it.

I also have a 83 LC t-case that can go right along with the adapter. I have set it up for twin stick, bearings are good and I replaced all the seals. asking $300 obo for it.

I do have the 700R4 to go with the above two, but it needs a rebuild. make an offer. I have no idea what it's worth for a core. If you buy the adapter and T-case for $800 you can have the tranny.

Oh I also have the B&M shifter for it and a tranny cooler. $80 for both obo

Isotel · 06-21-07, 07:29 PM

15x8 Ultra Aluminum Wheels 3.75" backspace..
Bead blasted and Clear coated, have not been mounted since!

id like to get $175 from a CLC member..

Lots of other Misc stuff

Passenger side LX450 Headlight $80
Drivers side FJ40 Door Late Style (needs some work, Rusty Bottom) $80
FJ40 30 Spline Rear Axle shafts $40 a set

Stuff that i need gone, or im junking it (some surface rust from sitting outside)
Radiator, needs repair! Free
x2 FJ40 Rear axle housings - $20 one has a 3rd member in it with no Spiders (Kippers got the SOA one)
Mini truck front Axle housing - (Sold to Manjerk)
1st Gen 4runner Tail Gate Dented, no rust, all the inner stuff and glass $30
3rd Gen Pickup Rear Chrome Bumper Make offer
FJ80 Running Board to Mud flap Trim Caps $20

photos here
http://www.risingsun4x4club.org/foru...ead.php?t=4076

LCPilot · 07-16-07, 09:40 PM

advance adapters unit that mates a 2wd 700R4 to a 19spline LC t-case. aluminum housing, spud shaft, and tranny mount. asking $600 OBO for all of it.

I also have a 83 LC t-case that can go right along with the adapter. I have set it up for twin stick, bearings are good and I replaced all the seals. asking $300 obo for it.

I have a 4wd 700R4. Will this adapter work with my transmission or will it only work with a 2wd?

88chevota · 07-16-07, 10:14 PM

My 700r4 was a 4wd. you just need to replace the shaft. So I have the good 2WD shaft in my tranny. The only difference between the two is the shaft and I believe the 4wd unit has some better clutch packs.

If you are interested I also will have a tranny cooler, and the B&M shifter to go with it all.

I'll send you a PM with my number. give me a call with any questions. I am willing to make a deal I need to get it out of my garage!!!