For Sale / Wanted Thread - Page 2

Jenny Cruiser · 11-18-06, 09:39 AM

Same thing as on Mud. I bought a few of these to get shipping down. I'm in Greeley and can deliver if need be. $340 for one or $320 each for group buy. Ph:970-302-7801 or email: jdarbin@yahoo.com Thanks!

Isotel · 12-04-06, 12:44 PM

Wanted Used 110 Mig Welder w/Gas Setup..
Worth a Shot i guess.. Somthing that will work well for sheetmetal/small projects

Uncle Ben · 12-04-06, 03:38 PM

Quote:

Originally Posted by isotel

Wanted Used 110 Mig Welder w/Gas Setup..
Worth a Shot i guess.. Somthing that will work well for sheetmetal/small projects

Trev,
Check Craigslist.com. Last time I was snooping for welders there was a ton of small 110 units - CHEAP!

trojan_knight · 12-20-06, 12:46 PM

i am not a member of the club but i am triing to part my '85 fj-60. i would like to keep it fairly local.
http://forum.ih8mud.com/co-wy-horsetooth-4-wheelers-cruiser-club/125840-85-fj-60-part-out.html

ted_ted · 12-25-06, 08:30 PM

I now have heavy duty front bumper for a 40 available. Well, technically not with me. It is still out in the middle of no where where my 40 is still stuck up to the axel. Trying to get it out I broke the mounting bolts right off. I am not going to put it back on. I would like to trade it for stock front bumper. I should be able to send pictures out by tuesday night.
Have a good one.

If you can pull my 40 it is yours free. I think I have to pay mr. tow man. Number is 360-0706

samsr · 12-30-06, 04:36 PM

Man jerk What drive shaft do you need. I have a few.
Isotel I have a welder you can borrow. Just need a tank of gas
Ted Ted Did you ever get it out. If not, I would be willing to give it try.

Man Jerk · 12-31-06, 12:00 PM

I got all squared away. Hopefully I don't wreck this one right away

Isotel · 01-09-07, 04:32 PM

Looks like Kendall has his truck for sale..

http://www.colorado4x4.org/vbb/showthread.php?t=84403

Hope all goes well with the sale, Its a SWEET truck! Good price! Hope your building something new!

iowaguy · 01-11-07, 02:57 AM

this toyota lc listed on craigslist wyoming. the vehicle is in laramie. 1977 Toyota land cruiser FJ40 * Low milage *Green - $2200

LCPilot · 01-12-07, 12:09 AM

There is a set of tire chains for 38" tires on craigs list.

http://cosprings.craigslist.org/pts/260823860.html

Just in time for Shubarth.

David

LCPilot · 01-12-07, 12:28 AM

Here is a set for 31" tires.

http://denver.craigslist.org/pts/260975249.html

David

Man Jerk · 01-12-07, 08:50 AM

Quote:

Originally Posted by LCPilot

There is a set of tire chains for 38" tires on craigs list.

http://cosprings.craigslist.org/pts/260823860.html

Just in time for Shubarth.

David

Damn, now all I need is a sawzall and some 38's

Isotel · 01-22-07, 06:21 PM

For Sale

SM465 mated to a 205.. Together or separate
This comes with the shifter, Bellhousing, adapter, ect..

3/4 ton Chevy Axles Dana 44 Front, 14 Bolt FF Rear, 8 Lug, stock..

Toyota Rock Crawler Frame/Cab, 1st Gen Body Style, Exo Cage, and rear seating area.. Ugly but works.. Act Quick or its going to the scrap yard!

Send me a PM if interested with an offer, these are a Friend of mine!

I also Still have a Cruiser 4 speed Tranny - Make me an offer

samsr · 01-24-07, 12:24 AM

I cpuld use the bellhousing If it is the aluminum kind. I need to get my red cruiser project rolling. How much does he want for it.

minisrule · 02-03-07, 12:26 AM

Email me for pics or info - minisrule@comcast.net

Cobra hand held CB, runs on batteries or adapter(which I don't have), Like new hardly used, model # 46WX Babe Winkelman Edition - $60 offer

2 Belkin 802.11b PCMCIA wireless cards, 1 new in unopened box, 1 new opened, Also 1 linksys, slightly used no box, I am not sure how much these are worth ? $15each, maybe? Make me an offer.

I am looking to get this stuff gone QUICKLY! So if your interested make me an offer or come look.
Thanks,
Andy

NickGurin · 02-05-07, 09:30 AM

I'm not sure if this is the right place for this notice...

I have a 1985 Landcruiser for sale.
Nice Truck.
218k miles. Its got rust.
Good interior.
It runs great and, although it is a very good truck and very dependable, it is just extra at this point.
$1800 firm.
We are north of Black Forest, Colorado, ten miles east of Interstate 25.
Photo of the interior is available in an add for this truck in the Vehicles/Trailers for sale section of IH8MUD.

303-814-3149

Thanks,
Nick Gurin

Isotel · 02-05-07, 12:46 PM

Good looking Truck!

EricG · 02-25-07, 09:50 PM

Anybody have a set of wheels & tires (condition unimportant) that will fit an 80 that I could borrow for a few weeks or buy cheap? I'll give you dibs on an 80 I may be parting (after I get the axles!)

Man Jerk · 02-25-07, 10:06 PM

I've got 3 you can have. They fit my 60 series, don't know if they fit an 80. They are just rollers.

Isotel · 02-25-07, 11:19 PM

im sure i could dig up one more! i may need some 80 parts.. What year is the truck?

2badfjs · 02-26-07, 07:34 AM

pm sent on the sander minisrule

EricG · 02-26-07, 10:56 AM

Quote:

Originally Posted by isotel

im sure i could dig up one more! i may need some 80 parts.. What year is the truck?

It's a 93. If I get it it will be with no drive train. The current owner is keeping the engine/tranny/transfer and I want it for the axles.

Thanks guys - I'll let you know as the deal progresses.

LCPilot · 02-27-07, 07:14 PM

I have 4ea. 35 12.50 15s that you can use. I think that they will fit without rubbing if you are only on the road.

Isotel · 03-01-07, 08:40 PM

http://www.risingsun4x4club.org/foru...ead.php?t=3183

$150

se the rising sun add for more photos

Man Jerk · 03-06-07, 03:34 PM

This'll be kinda an odd add

I ended up at the Napa store in Monument (needed a heater hose after mine split wide open) The guy at the counter mentioned that he had a new K&N air filter that he wanted to get rid of. $25 or so if memory serves me right.

So if anyones lookin for a K&N for an FJ60 (I assume later model FJ40's are same) go to the Napa in Monument.

Man Jerk · 03-06-07, 08:04 PM

For Sale:

H42 (stock) 4 speed transmission out of a late 85 FJ60. This is the long version.

80,000 miles on it. Picked it up a while ago to replace mine, but I'm no longer going to use it.

$50.00

Man Jerk · 03-08-07, 10:49 AM

Quote:

Originally Posted by Man Jerk

For Sale:

H42 (stock) 4 speed transmission out of a late 85 FJ60. This is the long version.

80,000 miles on it. Picked it up a while ago to replace mine, but I'm no longer going to use it.

$50.00

Looks like the tranny is spoken for.

ianacole · 03-08-07, 11:03 AM

I would like to find, for a '75 FJ40:

-seats that fit the front (trying to find some from a Celica, but haven't been able to locate a junkyard with any)
-front axle with disc (I could use the calipers at the same time)

Thanks!

Ian

Isotel · 03-09-07, 09:26 AM

Ive got an H42 4 speed.. out of my 76 FJ40.. i will take $50 for it
CV Minitruck Driveshaft $50

Man Jerk · 03-13-07, 10:38 AM

FJ62 front Axle housing.

Axle housing only. This has been stripped of everything. Was gonna use it for an SOA but I ain't gonna do that.

The FJ62 housing has a gusset from the factory. I've also heard that it has more caster than the 40 or 60 housings.

Once again, this housing has been stripped. No perches, steering stops etc...

$50 or offer.