Cabinet Blaster

Yo_Han · 01-13-04, 07:08 AM

Howdy all!
In the market for a cabinet blaster. Not too sure what to look for. My compressor is rated for 6.4cfm @90psi. Looking to try to keep it under 200 if possible. Any mininum work space size, features, etc to look for.

Thanks!
Yo Han

woody · 01-13-04, 07:14 AM

step 1> air compressor tank size. I run a 30 gallon horizontal tank with a 6 horse dual stage compressor on 220....and it's not enuf. It cycles constantly. IMO, a 100 gallon tank is recommended, 60 might be enuf tho.

I've got the cheap floor standing model from Harbor Freight and it works just fine, other than my air problem...

Yo_Han · 01-13-04, 07:42 AM

Hey Woody!
Yeah I got a 30gallon with a 6hp compressor also... that's funny bc that cheap standup on harbor is one of the ones i got eyeballed.

...woody, been spacing on shippin you that cooler... I will get that out to you

Yo Han

Yo_Han · 01-13-04, 07:50 AM

What's the better media to use for blasting metal parts with rust and paint?

woody · 01-13-04, 08:12 AM

I've got the glass bead stuff...honestly, I use it regularly for MGB parts on my wifes car and it works nicely for cleaning those for painting. No metal deformation etc. IIRC, the true sand stuff is hard on thin stuff.

Yo_Han · 01-13-04, 09:12 AM

Kewl...thanx Woody!

IDave · 01-13-04, 03:01 PM

What is the minimum work area you guys like for inside the box? Also, do you think the light is important, or just as good to add a cheap one later?

woody · 01-13-04, 07:38 PM

mine has the flourescent....and it's adequate. My buddy has the regular bulb, and he prefers mine.

IMO, decide what you wanna clean first for box size. Mine is the floor standing-type...and it works for most items, might even be able to squeeze a rim in there....

IDave · 01-13-04, 08:31 PM

Thanks. I'm thinking fluorescent, built in. Just wondering if I should get something big enough to clean up that old stamped bezel.

Yo_Han · 01-14-04, 08:44 AM

Hey IDave... been doing some shopping around.. found this one...itz 36"X24"X24" work area for 199. Comes with a light kit too.

http://www.northerntool.com/webapp/w...4&categoryId=0

Yo Han

IDave · 01-14-04, 12:42 PM

You know, almost got that one, but their shipping is outrageous. I am looking at this one from harbor freight (free shipping, so it ends up being less expensive).

Woody, is this the one you have?

Yo_Han · 01-14-04, 01:36 PM

lol...eyeballin that one too. Yeah the free shipping is nice, buddy of mine has a membership with NT and they do free shipping for items up to 50lbs, but it's 53lb

They quoted me 30 fer shippin... got a week to figure it out.

IDave · 01-14-04, 04:28 PM

Let's see: $150 (must go truck) vs. $30. Still a deal.

Yo_Han · 01-14-04, 08:41 PM

DANG! ...they quoted 150 for shipping? Maybe the guy i spoke with or vice versa misquoted on shipping?

IDave · 01-14-04, 09:00 PM

The $150 was Northern.

IDave · 01-16-04, 07:03 PM

So today Northern sends me a free shipping for orders over $150 code. That changes the dynamics.

Yo_Han · 01-17-04, 06:24 PM

Nice IDave! you can't beat that with a stick. Is it a personal code?

IDave · 01-17-04, 07:52 PM

Don't really think it is personal. I'll share it if you want. However, the only comparable cabinet is backordered, and the free shipping doesn't apply to out of stock items. So, I went back and looked at the Harbor Freight. Went through the ordering process, and shipping is (completely) free there. So I just bit and ordered that one!

Again, if you are interested in the Northern Tool code, let me know.

Yo_Han · 01-19-04, 05:36 PM

Nice IDave! If you got the the one in the image above, that's a nice one. Got the fluorescent light too, unlike the one in Northen I posted the link to. Think I'll take you up on the free shipping code, ordering one this Friday, hope it's good till then and they restock

Thanks!
Yo Han

IDave · 01-19-04, 09:18 PM

No luck. It's already run out. Dag dingy dang it. >:(

Yo_Han · 01-20-04, 05:28 AM

No problem IDave, thanks for the offer tho.

01-13-04, 07:08 AM	#1
Yo_Han IH8MUD Regular Join Date: Sep 2003 Location: NC Posts: 223	Cabinet Blaster Howdy all! In the market for a cabinet blaster. Not too sure what to look for. My compressor is rated for 6.4cfm @90psi. Looking to try to keep it under 200 if possible. Any mininum work space size, features, etc to look for. Thanks! Yo Han

01-13-04, 07:14 AM	#2
woody Admin Join Date: Jan 2002 Location: Appleton, WI TLCA# 1548 Posts: 7,606 Blog Entries: 1	Re:Cabinet Blaster step 1> air compressor tank size. I run a 30 gallon horizontal tank with a 6 horse dual stage compressor on 220....and it's not enuf. It cycles constantly. IMO, a 100 gallon tank is recommended, 60 might be enuf tho. I've got the cheap floor standing model from Harbor Freight and it works just fine, other than my air problem...

01-13-04, 07:42 AM	#3
Yo_Han IH8MUD Regular Join Date: Sep 2003 Location: NC Posts: 223	Cabinet Blaster Hey Woody! Yeah I got a 30gallon with a 6hp compressor also... that's funny bc that cheap standup on harbor is one of the ones i got eyeballed. ...woody, been spacing on shippin you that cooler... I will get that out to you Yo Han

01-13-04, 07:50 AM	#4
Yo_Han IH8MUD Regular Join Date: Sep 2003 Location: NC Posts: 223	Cabinet Blaster What's the better media to use for blasting metal parts with rust and paint?

01-13-04, 08:12 AM	#5
woody Admin Join Date: Jan 2002 Location: Appleton, WI TLCA# 1548 Posts: 7,606 Blog Entries: 1	Re:Cabinet Blaster I've got the glass bead stuff...honestly, I use it regularly for MGB parts on my wifes car and it works nicely for cleaning those for painting. No metal deformation etc. IIRC, the true sand stuff is hard on thin stuff.

01-13-04, 09:12 AM	#6
Yo_Han IH8MUD Regular Join Date: Sep 2003 Location: NC Posts: 223	Cabinet Blaster Kewl...thanx Woody!

01-13-04, 03:01 PM	#7
IDave IH8MUD Lifer Join Date: Jan 2003 Location: McCall, ID TLCA# 13705 Posts: 6,222	Cabinet Blaster What is the minimum work area you guys like for inside the box? Also, do you think the light is important, or just as good to add a cheap one later?

01-13-04, 07:38 PM	#8
woody Admin Join Date: Jan 2002 Location: Appleton, WI TLCA# 1548 Posts: 7,606 Blog Entries: 1	Re:Cabinet Blaster mine has the flourescent....and it's adequate. My buddy has the regular bulb, and he prefers mine. IMO, decide what you wanna clean first for box size. Mine is the floor standing-type...and it works for most items, might even be able to squeeze a rim in there....

01-13-04, 08:31 PM	#9
IDave IH8MUD Lifer Join Date: Jan 2003 Location: McCall, ID TLCA# 13705 Posts: 6,222	Cabinet Blaster Thanks. I'm thinking fluorescent, built in. Just wondering if I should get something big enough to clean up that old stamped bezel.

01-14-04, 08:44 AM	#10
Yo_Han IH8MUD Regular Join Date: Sep 2003 Location: NC Posts: 223	Cabinet Blaster Hey IDave... been doing some shopping around.. found this one...itz 36"X24"X24" work area for 199. Comes with a light kit too. http://www.northerntool.com/webapp/w...4&categoryId=0 Yo Han

01-14-04, 12:42 PM	#11
IDave IH8MUD Lifer Join Date: Jan 2003 Location: McCall, ID TLCA# 13705 Posts: 6,222	Cabinet Blaster You know, almost got that one, but their shipping is outrageous. I am looking at this one from harbor freight (free shipping, so it ends up being less expensive). Woody, is this the one you have?

01-14-04, 01:36 PM	#12
Yo_Han IH8MUD Regular Join Date: Sep 2003 Location: NC Posts: 223	Cabinet Blaster lol...eyeballin that one too. Yeah the free shipping is nice, buddy of mine has a membership with NT and they do free shipping for items up to 50lbs, but it's 53lb They quoted me 30 fer shippin... got a week to figure it out.

01-14-04, 04:28 PM	#13
IDave IH8MUD Lifer Join Date: Jan 2003 Location: McCall, ID TLCA# 13705 Posts: 6,222	Cabinet Blaster Let's see: $150 (must go truck) vs. $30. Still a deal.

01-14-04, 08:41 PM	#14
Yo_Han IH8MUD Regular Join Date: Sep 2003 Location: NC Posts: 223	Cabinet Blaster DANG! ...they quoted 150 for shipping? Maybe the guy i spoke with or vice versa misquoted on shipping?

01-14-04, 09:00 PM	#15
IDave IH8MUD Lifer Join Date: Jan 2003 Location: McCall, ID TLCA# 13705 Posts: 6,222	Cabinet Blaster The $150 was Northern.

01-16-04, 07:03 PM	#16
IDave IH8MUD Lifer Join Date: Jan 2003 Location: McCall, ID TLCA# 13705 Posts: 6,222	Cabinet Blaster So today Northern sends me a free shipping for orders over $150 code. That changes the dynamics.

01-17-04, 06:24 PM	#17
Yo_Han IH8MUD Regular Join Date: Sep 2003 Location: NC Posts: 223	Cabinet Blaster Nice IDave! you can't beat that with a stick. Is it a personal code?

01-17-04, 07:52 PM	#18
IDave IH8MUD Lifer Join Date: Jan 2003 Location: McCall, ID TLCA# 13705 Posts: 6,222	Cabinet Blaster Don't really think it is personal. I'll share it if you want. However, the only comparable cabinet is backordered, and the free shipping doesn't apply to out of stock items. So, I went back and looked at the Harbor Freight. Went through the ordering process, and shipping is (completely) free there. So I just bit and ordered that one! Again, if you are interested in the Northern Tool code, let me know.

01-19-04, 05:36 PM	#19
Yo_Han IH8MUD Regular Join Date: Sep 2003 Location: NC Posts: 223	Cabinet Blaster Nice IDave! If you got the the one in the image above, that's a nice one. Got the fluorescent light too, unlike the one in Northen I posted the link to. Think I'll take you up on the free shipping code, ordering one this Friday, hope it's good till then and they restock Thanks! Yo Han

01-19-04, 09:18 PM	#20
IDave IH8MUD Lifer Join Date: Jan 2003 Location: McCall, ID TLCA# 13705 Posts: 6,222	Cabinet Blaster No luck. It's already run out. Dag dingy dang it. >:(

01-20-04, 05:28 AM	#21
Yo_Han IH8MUD Regular Join Date: Sep 2003 Location: NC Posts: 223	Cabinet Blaster No problem IDave, thanks for the offer tho.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode