96 Runner and '94 pickup..same wheels?

TOZOVR · 04-22-05, 06:17 PM

Are the bolt pattern and spacing the same?

Thanks!

RJ

No power · 04-22-05, 07:15 PM

I don't know about backspacing but
I know that the bolt pattern is the same
as long as the truck and 4-runner are
both 4-wheel drive

KliersLC · 04-23-05, 01:39 AM

The drivetrains are identical so the backspacing should be the same. Bolt pattern and center hole are identical, The only difference will be what style.

Tools R Us · 04-23-05, 08:16 AM

The '96 is coil spring, the '94 is torsion bar front suspension. If your going to fit '96 alloy wheels on '94 the center caps on the front will need a hole in them to clear the drive plate. Looks good with locking hubs, not so good with the drive plates.

corbs · 04-28-05, 05:07 PM

I don't believe the backspacing is the same. The truck rims will probably stick out slightly more. This is definitely true with the steel wheels from 94-95 4Runners. I don't remember the exact measurements though.

Tacoma rims also stick out a little more than the 4Runner rims do. . .

94 4Runner rims on 96 4Runner

SizzleChest · 04-29-05, 04:46 PM

04-22-05, 06:17 PM	#1
TOZOVR IH8MUD Regular Join Date: Jan 2004 Posts: 395	96 Runner and '94 pickup..same wheels? Are the bolt pattern and spacing the same? Thanks! RJ __________________ You can’t make a race car out of a pig, but you can make a damn fast pig VTXS TLCA

04-23-05, 01:39 AM	#3
KliersLC IH8MUD Lifer Join Date: Oct 2004 Location: Stafford, VA Posts: 2,241	The drivetrains are identical so the backspacing should be the same. Bolt pattern and center hole are identical, The only difference will be what style. __________________ No problem, I'll just tow the pig to Salt Lake on a UHAUL trailer...... 95 T100, beater edition 01 Sequoia Limited 02 Camry--Poor replacement for an 80 "A vehicle's capabilities are inseparably linked to the mental instability of the driver"

04-23-05, 08:16 AM	#4
Tools R Us IH8MUD Lifer Join Date: Jul 2004 Location: Chandler, AZ Posts: 6,070	The '96 is coil spring, the '94 is torsion bar front suspension. If your going to fit '96 alloy wheels on '94 the center caps on the front will need a hole in them to clear the drive plate. Looks good with locking hubs, not so good with the drive plates. __________________ Kevin Patterson '96 LX450 '84 4x4 Mini '73 FJ40 Copper State Cruisers #007 "We have come to the conclusion that we can run our car over any road that a man can take a team of horses and a wagon, providing we can get traction." Dr. Horatio Nelson Jackson, 1903

04-28-05, 05:07 PM	#5
corbs IH8MUD Regular Join Date: Mar 2004 Location: Beaverton, OR Posts: 220	I don't believe the backspacing is the same. The truck rims will probably stick out slightly more. This is definitely true with the steel wheels from 94-95 4Runners. I don't remember the exact measurements though. Tacoma rims also stick out a little more than the 4Runner rims do. . . 94 4Runner rims on 96 4Runner __________________ 91 FJ80, 6" Slee Outbacked, 37x12.5x15 MT/Rs, ARB Locker, ARB Bumper, Lexus ES300 leather seat 'My name is Ozymandias, king of kings: Look on my works, ye Mighty, and despair!' -P.B. Shelley http://www.chobaka.com/4x4

04-29-05, 04:46 PM	#6
SizzleChest IH8MUD Addict Join Date: Jul 2004 Location: Vancouver, BC Posts: 746	__________________ -Brendan (land cruiser enthusiast in training) 1978 FJ40 1992 Toyota "Truck" *DO NOT CLICK HERE*

04-22-05, 07:15 PM	#2
No power IH8MUD Rookie Join Date: Mar 2005 Location: kentucky Posts: 65	I don't know about backspacing but I know that the bolt pattern is the same as long as the truck and 4-runner are both 4-wheel drive

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode