|
Ending notes and credits:
Thanks to Cruiserdan, he was calling me back regarding a part order while I was in the shop during the snorkel install and recommended dropping the cruise control and antenna (and not the rubber grommet), it helped out a lot.
Most recommended tool… step drill. If you don’t have one I suggest investing in one, makes for very clean and easy holes.
Use touch up paint, supposedly it holds less moisture than primer making it a little more resistant to rusting.
Take your time and keep checking and re-checking at every step.
Use a 3 ½” drill bit, I toyed with idea of some other sizes because the snorkel inlet hole isn’t that big but with the vacuum hose it fits perfectly.
Directions call for the removal of side marker light (JDM marker lights), I have these and found no need to remove it.
|