Quote:
|
Originally Posted by Romer
This was the cost from the Machine shop:
Cylinder head cleaned, valves buffed, new valve seal installed. Head milled 0.011 Head was lightly warped 252.50
If everything else is OK, you could have the head milled for about $100.
I got the headgasket "set" from CDAN. I think it was less than $200.
10 hours of labor was what I was told a headgasket job takes. Mine was more becuase I had other things done (see above) and it came to about 15 hours.
|
Not quite as bad as I would have thought, and you know you got quality work.
