******** ome template error ********

landtank · 07-25-08, 09:46 PM

I hope the mods don't mind this but there is an error on the last batch of OME caster templates I had made.

The orientation arrow pointing to the front of the truck is wrong, it's actually pointing to the rear. You can confirm this by comparing what you have to that in this thread.

I've emailed everyone that should have gotten one of the mistakes but since those names don't match the MUD ones I wanted to post here as well to be sure they get the word.

To correct the template change the arrow to point the other way.

This is only for the OME bushings, the Slee templates are OK.

Sorry for any inconvenience

The list of people I have who would likely have one is:

Steven Boyer, CA
Nicholas Racker, IA
John Wendt, MT
Brad Pennington, CA

If anyone knows these people and wouldn't mind contacting them I'd appreciate it as well.

Once I know that everyone has been contacted I'll delete this thread.

nicholas · 07-26-08, 12:23 AM

No worries Rick, I hadn't installed mine yet, so I switched the arrows per posted thread. Thanks for the heads up.

CreepyCrawler61 · 08-05-08, 07:36 AM

I caught the error on my template too. No worries.

landtank · 08-05-08, 11:23 AM

can one of the MODS delete this thread now. I didn't realize I lost that ability until now.

Thanks

07-25-08, 09:46 PM	#1
landtank ThinkTank Waterboy Join Date: Mar 2003 Location: Boston MA Posts: 11,119	****** ome template error ****** I hope the mods don't mind this but there is an error on the last batch of OME caster templates I had made. The orientation arrow pointing to the front of the truck is wrong, it's actually pointing to the rear. You can confirm this by comparing what you have to that in this thread. I've emailed everyone that should have gotten one of the mistakes but since those names don't match the MUD ones I wanted to post here as well to be sure they get the word. To correct the template change the arrow to point the other way. This is only for the OME bushings, the Slee templates are OK. Sorry for any inconvenience The list of people I have who would likely have one is: Steven Boyer, CA Nicholas Racker, IA John Wendt, MT Brad Pennington, CA If anyone knows these people and wouldn't mind contacting them I'd appreciate it as well. Once I know that everyone has been contacted I'll delete this thread. __________________ Rick Bigelow '96 215k Groveland MA 01834 If you're not the lead dog, the view never changes Last edited by landtank; 07-25-08 at 09:53 PM.

07-26-08, 12:23 AM	#2
nicholas IH8MUD Addict Join Date: Jun 2006 Location: IA Posts: 892	No worries Rick, I hadn't installed mine yet, so I switched the arrows per posted thread. Thanks for the heads up. __________________ 97LX450, 141K, 285CooperSST's, OME851/860's, S/C, CDL 7-Pin, Landtank MAF, Slee SS lines, 100 pads, silicone PHH, Raventai temp, CDan parts throughout($5K+). Chillin' in Cornfeilds (IA) studying.

08-05-08, 07:36 AM	#3
CreepyCrawler61 IH8MUD Rookie Join Date: May 2007 Location: Modesto, CA TLCA# 17516 Posts: 53	I caught the error on my template too. No worries. __________________ sb '93 FZJ80: factory lockers, CDL switch/7-pin mod, OME 851/860, Toyo Open Country 285's, George's LED's, and tunes by Alpine.

08-05-08, 11:23 AM	#4
landtank ThinkTank Waterboy Join Date: Mar 2003 Location: Boston MA Posts: 11,119	can one of the MODS delete this thread now. I didn't realize I lost that ability until now. Thanks __________________ Rick Bigelow '96 215k Groveland MA 01834 If you're not the lead dog, the view never changes

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode