 | |
05-13-07, 09:21 PM
|
#1 | | 250+ Club
Join Date: May 2004
Posts: 353
| ROTWII nmostofi I am going to go ahead and do my ROTW although I won't be able to answer questions right away. This is going to be my second ROTW, I won't bore you guys with when I bought the 80 and what inspired me to get into Land Cruisers, I covered all of that in my first ROTW. The upgrades that I have done since the last time are :
OME J springs
OME L shocks
Slee SS 4" longer brake lines
Slee front sway bar drop bracket
Slee rear sway bar bracket
Slee front bumstop spacer
Slee rear bumstop spacer
Slee blue bushings
315/75/16 Toyo Open Country MT's
updated 4x4labs rear bumper w/side protection
Iron pig offroad belly skid plate
I am sure I have forgotten something, if it comes to me I will update the list. I put the suspension and tires on my truck a week before Cruise Moab 07, it handled perfectly. I had a small amount of rubbing at full flex, so I think I am going to run a 1.5 spacer upfront. Right now I am running a 1" Mr.gasket spacer and have a bit of the "stink Bug" look. Here are some pics of the truck.
__________________ 93 fzj80 factory lockers, OME 850J/863Jetc.
82 fj40 OME, ARB front bumper, Warn 8274, Kaymar rear bumper, 255/85/16 BFG mud's on OEM split rims |
| |
05-13-07, 09:22 PM
|
#2 | | 250+ Club
Join Date: May 2004
Posts: 353
| Some wheeling pics from Moab
__________________ 93 fzj80 factory lockers, OME 850J/863Jetc.
82 fj40 OME, ARB front bumper, Warn 8274, Kaymar rear bumper, 255/85/16 BFG mud's on OEM split rims |
| |
05-13-07, 09:27 PM
|
#3 | | 250+ Club
Join Date: May 2004
Posts: 353
| pretty cool sequence
__________________ 93 fzj80 factory lockers, OME 850J/863Jetc.
82 fj40 OME, ARB front bumper, Warn 8274, Kaymar rear bumper, 255/85/16 BFG mud's on OEM split rims |
| |
05-13-07, 09:33 PM
|
#4 | | Addict
Join Date: Sep 2004 Location: Hayward, Ca.
Posts: 1,511
| Quote:
Originally Posted by nmostofi I am going to go ahead and do my ROTW although I won't be able to answer questions right away. This is going to be my second ROTW, I won't bore you guys with when I bought the 80 and what inspired me to get into Land Cruisers, I covered all of that in my first ROTW. | Navid, quit being lazy and tell us all again how you fell in love with the land cruiser and how you made me turn into a nut just like you...
Beaut. cruiser by the way..But you already know that...
__________________ Robert Muniz
1993 Toyota Land Cruiser 238K
1971 Toyota Land Cruiser
2008 Dodge Ram Cummins 4x4
82 FJ60 RIP 78 FJ40 sold |
| |
05-13-07, 09:42 PM
|
#5 | | 250+ Club
Join Date: May 2004
Posts: 353
| my next immediate upgrades are these cool high quality JDM stickers which were made by Mark Tescari and a middle east spec. hood ornament (thanks Mot!) like the one pictured  In the next few months I will be re-gearing to 4:88's.
__________________ 93 fzj80 factory lockers, OME 850J/863Jetc.
82 fj40 OME, ARB front bumper, Warn 8274, Kaymar rear bumper, 255/85/16 BFG mud's on OEM split rims |
| |
05-13-07, 09:42 PM
|
#6 | | Addict
Join Date: Aug 2005 Location: Ione CA
Posts: 1,739
| Nice brother!
Looking good, Im likeing the can carrier.
Man those are some killer shots in Moab wish I could have been there
L8R
ken
__________________ 97 with thingy's and dodads GONE
Now with added geek KI6JEO |
| |
05-13-07, 09:45 PM
|
#7 | | 250+ Club
Join Date: May 2004
Posts: 353
| Robert you know the story too well. How can somone not fall in love with such a rugged machine that the 80 is  My ride is cool becouse you and your dad halped me do most of the upgrades
__________________ 93 fzj80 factory lockers, OME 850J/863Jetc.
82 fj40 OME, ARB front bumper, Warn 8274, Kaymar rear bumper, 255/85/16 BFG mud's on OEM split rims |
| |
05-13-07, 09:48 PM
|
#8 | | 250+ Club
Join Date: May 2004
Posts: 353
| thanks Ken can't wait to hit trials with you at Wentworth springs
__________________ 93 fzj80 factory lockers, OME 850J/863Jetc.
82 fj40 OME, ARB front bumper, Warn 8274, Kaymar rear bumper, 255/85/16 BFG mud's on OEM split rims |
| |
05-14-07, 12:47 AM
|
#9 | | Lifer
Join Date: May 2004 Location: 'in dat der briar patch'
Posts: 3,931
| Beautiful truck..........
Nice upgrades bet they were fun at Moab.
Thanks for contributing although I know it wasn't convenient timing.
Always appreciated.
__________________ "If it wasn't a Landcruiser and hadn't been built the way it was you do realize you would be DEAD." VA State Police Officer |
| |
05-14-07, 05:06 AM
|
#10 | | Addict
Join Date: Jan 2005 Location: Dallas, Texas
Posts: 1,331
| Whar rear springs are you running...863's? Do you plan on a coil spacer to get rid of the stinkbug look?
airlaird |
| |
05-14-07, 08:43 AM
|
#11 | | Addict
Join Date: Feb 2006 Location: Oregon
Posts: 1,008
| Nice!
Can't wait to get my my 4X4labs bumper!
__________________ 2005 GX470, KDSS, FJ wheels, Revo's 265-70-16, running boards,spoiler, roof rack off! HIDs. |
| |
05-14-07, 10:17 AM
|
#12 | | 250+ Club
Join Date: May 2004
Posts: 353
| Thanks guys, I am running 863J springs in the rear and 850J springs in the front. I am also running a 1" spacer in the front, the rear sits higher than the front as seen in the pics. Not a big deal but I think eventually I will switch to a 1.5" spacer. The 4x4labs bumper is a piece of art. Very rugged, I beat the crap out of it in Moab, scraped it on rock, had the whole wight of the truck on it a couple of times and it still looks good, a very good buy. I am borrowing the two jerry can holder from Luke until he has my ladder/three jerry can holder ready for pick up, what a nice guy  here are some pics of the rear bumper.
__________________ 93 fzj80 factory lockers, OME 850J/863Jetc.
82 fj40 OME, ARB front bumper, Warn 8274, Kaymar rear bumper, 255/85/16 BFG mud's on OEM split rims |
| |
05-14-07, 12:40 PM
|
#13 | | 250+ Club
Join Date: Aug 2005 Location: Grass Valley CA
Posts: 697
| Very nice
__________________ Snorked & Locked with CDL 94 FZJ80 \ F.O.R 4" Lift kit \ 315 Toyo Mts , 4.88 gears \ Inti Roof Rack with Lightforce 170s \ ARB front with Warn 12000 \ Labs Rear \ Hanna Sliders \ Slee skid plates, Rear lower control arms, and tie-rods \ Landtank CC plates \ NAV system \ CB & 2 Meter Radio \ Diff Breather \ Con tested, Expedition ready |
| |
05-14-07, 04:43 PM
| | ERG80 |
This message has been deleted by ERG80.
|
05-14-07, 04:46 PM
|
#14 | | Addict
Join Date: Dec 2006 Location: TN
Posts: 2,017
| Your rig looks great. Are accessories interchangeable on the 4x4 labs rear? like the ladder and jerry cans?
ERG80
__________________ 1997 TOYOTA T100 SR5 4x4
stockish, 205,000 miles 1996 T O Y O T A LAND CRUISER FZJ-80- SOLD Gaucho Grande FJ-40 HP252 (Nephew's build) 15" tires. 18v battery upgrade, FJ-40 emblems, toy CB, toy cassette radio, trailer build in progress. Gaucho Super Power FJ-40 IGOD0500US (Niece's build) 24v, FJ-40 emblems, 15" tires w/ hard foam tread, 24V scooter (brushless) motors, Disc Brakes, working radio, LED headlights and taillights, underbody lights for added safety. |
| |
05-14-07, 05:13 PM
|
#15 | | Forum Regular
Join Date: Aug 2004 Location: bayarea, ca
Posts: 24
| Navid, damnnn, like those new rubbers on your rig.
KV
__________________ 96.lx450 |
| |
05-14-07, 08:35 PM
|
#16 | | 250+ Club
Join Date: May 2004
Posts: 353
| yes the accessories are interchangeable on the rear bumper, he calls his system modular. Currently I have a tire carrier and a two jerry can holder. He is making me a ladder which a three can jerry can holder attaches to, pretty cool design. Thanks for the complement Sam I think Luke told me that you and I plus one more person in Colorado has the rear corner panel protection. He says its a pain to make and that the truck needs to be at his shop for him to get it right. KV, thanks yes it was time for new rubber and I didn't want to stick to the 285's so in came the 315's
__________________ 93 fzj80 factory lockers, OME 850J/863Jetc.
82 fj40 OME, ARB front bumper, Warn 8274, Kaymar rear bumper, 255/85/16 BFG mud's on OEM split rims |
| |
05-16-07, 06:33 PM
|
#17 | | Lifer
Join Date: Oct 2003 Location: North Cadillac
Posts: 8,109
| too nice.
__________________ 95' FZJ80 OME med./J lift, ARB rack, ARB Bull Bar w/tmax 12,500, 35" truxus, Aussie locker-rear, Center Diff Lock, Sliders, IPOR Skid, IPOR rear bumper, upgraded slee sticker, custom dents, supercharged. . .
Remember it's a gateway drug, so it will actually lead to "crystal meh".
Go 80, or go unsatisfied |
| |
05-17-07, 11:43 AM
|
#18 | | Forum Regular
Join Date: Apr 2006 Location: HI 96816
Posts: 96
| Real nice rig but I wish I had that bumper.  Its sooo sick!
__________________ "For some reason, the ugly green versions got a higher percentage of this option. I guess that was the only way Toyota could sell Land Cruisers in that hideous colour." -B- 1.96 80 2.83 b2000 |
| |
05-18-07, 08:53 AM
|
#19 | | Skillet
Join Date: Nov 2005 Location: КАГІҒОЯИІА
Posts: 3,804
| Clean rig. Love it.
Another fine 80! |
| |
05-18-07, 11:30 AM
|
#20 | | 250+ Club
Join Date: May 2004
Posts: 353
| thanks fellas, here are some pics of underneath, the Hanna sliders/cat skid-plate got a good workout, not so much the IPOR skid-plate, the last pic is of my exhaust which I had rerouted. Previously the exhaust came out behind the rear passenger side tire. When I stepped up to the 315's it was apparent that it was going to get crushed. I had a muffler shop reroute it to exit right under the rear bumper.
__________________ 93 fzj80 factory lockers, OME 850J/863Jetc.
82 fj40 OME, ARB front bumper, Warn 8274, Kaymar rear bumper, 255/85/16 BFG mud's on OEM split rims |
| |  | | | Thread Tools | | | | Display Modes | Linear Mode |
Posting Rules
| You may not post new threads You may not post replies You may not post attachments You may not edit your posts HTML code is Off | | | |