Help me

Sir_Titus · 11-09-04, 10:09 PM

2 things:

what is the correct backspacing for the wheels?

My carb is being a pain in the ass. I can't find any vaccume leaks and it runs rich it won't Idle unless it is at 1100 RPMs and it is still a rough idle. and if you cover the top of the carb it runns smooth then The intake gasket is good. PLEASE HELP.

tonkota · 11-10-04, 06:14 PM

I think, 3.5" for the solid axle trucks. I'll measure my stock rims to make sure.

Carbs? I don't know a thing about them, except that the Weber isn't as good as it sounds. EFI for me. Sorry I couldn't help with that. Maybe not enough fuel to mix with the air? Is this on a 20R or 22R?

Sir_Titus · 11-10-04, 07:08 PM

22r

hammerhead · 11-11-04, 12:23 AM

Do you have power to your fuel cutoff solenoid?

11-09-04, 10:09 PM	#1
Sir_Titus IH8MUD Junior Join Date: Aug 2003 Location: Maracopa Posts: 116	Help me 2 things: what is the correct backspacing for the wheels? My carb is being a pain in the ass. I can't find any vaccume leaks and it runs rich it won't Idle unless it is at 1100 RPMs and it is still a rough idle. and if you cover the top of the carb it runns smooth then The intake gasket is good. PLEASE HELP. __________________ Founder of the T.I.N.F.J. Club From the land of sky-blue water SWANKy Copper State Cruisers 1981 Toy Truck Lifted

11-10-04, 06:14 PM	#2
tonkota IH8MUD Lifer Join Date: Sep 2004 Location: Spokane, WA TLCA# 14154 Posts: 1,257 Blog Entries: 4	I think, 3.5" for the solid axle trucks. I'll measure my stock rims to make sure. Carbs? I don't know a thing about them, except that the Weber isn't as good as it sounds. EFI for me. Sorry I couldn't help with that. Maybe not enough fuel to mix with the air? Is this on a 20R or 22R? __________________ A Ron Using one cruiser to go mountain biking, and the other to collect dust. 2F-E Article McNamara gear writeup

11-10-04, 07:08 PM	#3
Sir_Titus IH8MUD Junior Join Date: Aug 2003 Location: Maracopa Posts: 116	22r __________________ Founder of the T.I.N.F.J. Club From the land of sky-blue water SWANKy Copper State Cruisers 1981 Toy Truck Lifted

11-11-04, 12:23 AM	#4
hammerhead IH8MUD Lifer Join Date: Jul 2003 Location: Central, Utah Posts: 1,986	Do you have power to your fuel cutoff solenoid? __________________ utah4x4club.com U4WDA

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode