Low Gear TCase for KZJ73

[ArnaudBJ42]

Hi,

I search a low gear tcase kit for a toyota KZJ73.
High speed are OK, but low speed are too high.
But I don't know the type of my tcase ?

If I buy the ref : 4.70 Transfer Case Gear Kits here : http://www.marlincrawler.com/transfercase.html

Do I have all pieces nedded ? For 449$ ? And for a KZJ73 ?

Thanks for your help,

Arnaud

[ArnaudBJ42]

Nobody to help me ?

And here :

http://66.220.22.198/commerce/catalo...=1098283843515

Thanks,

Arnaud

[beanz2]

Those gears are for the Hilux transfer cases and will not work for your KZJ73. Marks4WD in Australia has 2.81 and 3.05 low gear ratio gears for your transfer.

http://www.marks4wd.com/lc-extra-low-tc-gears.htm

Hope this helps,
Dave

[beanz2]

BTW, your questions may be better posted on the International Cruiser Tech section as this section is mainly for the Toyota trucks (Hilux) and 4Runners.

Cheers,
Dave

[ArnaudBJ42]

It's done,
Thanks,

[wesintl]

The KZJ (93-94?) was basically the Prado before the 90 series came out. I believe it has mostly hilux style running gear. Especially since it has a r151f. In the states i think the r151f was mated to an rf1a gear drive case with 23 spline?

Maybe the Truck tech folks can help him verify what kind of xfer he has.

[ArnaudBJ42]

Originally Posted by wesintl

The KZJ (93-94?) was basically the Prado before the 90 series came out. I believe it has mostly hilux style running gear. Especially since it has a r151f. In the states i think the r151f was mated to an rf1a gear drive case with 23 spline?
Maybe the Truck tech folks can help him verify what kind of xfer he has.

Hi,
Ok, I have a 1KZT engine and a R151f speed box.
If my tcase is really a RF1A, what is the solution to decrease my low speed without decrease my high speed.
Be careful ) Ok for around 400$, but not ok for 1500$ )))
Thanks,
Arnaud