Mega travel ball joints...

H8PVMNT · 04-11-07, 05:52 PM

I am seting up an IFS truck with ball joint spacers, Emu torsion bars, heim joint steering and some long bilstiens. Is anyone using the mega travel ball joints with low pro compression bump stops with this setup? Just wondering if it's worth the extra coin for a bit more comresion travel.

Bear80 · 04-11-07, 07:20 PM

Not unless you're using new upper arms. Stock arms with BJ-spacers/low bump stops don't need new ball joints.

norcalsvx · 04-12-07, 10:43 AM

i run almost the same set up w/o the mega travel BJ ( i just put new ones in while i was in there) the set up works great for what i do

before i put the low pro bumps in

04-11-07, 05:52 PM	#1
H8PVMNT IH8MUD Junior Join Date: Mar 2007 Location: Ft. Benton, MT Posts: 77	Mega travel ball joints... I am seting up an IFS truck with ball joint spacers, Emu torsion bars, heim joint steering and some long bilstiens. Is anyone using the mega travel ball joints with low pro compression bump stops with this setup? Just wondering if it's worth the extra coin for a bit more comresion travel.

04-11-07, 07:20 PM	#2
Bear80 IH8MUD Lifer Join Date: Sep 2004 Location: San Antonio, TEXAS TLCA# 14779 Posts: 2,496	Not unless you're using new upper arms. Stock arms with BJ-spacers/low bump stops don't need new ball joints. __________________ 40th FZJ80 - Range Rover Recovery Vehicle Alamo City Land Cruisers -Benjamin-

04-12-07, 10:43 AM	#3
norcalsvx IH8MUD Rookie Join Date: Nov 2006 Posts: 33	i run almost the same set up w/o the mega travel BJ ( i just put new ones in while i was in there) the set up works great for what i do before i put the low pro bumps in __________________ 1994 toy 22re Engbldr. street rv head 261c,LC header,Downey dualshocks, BJ spacers, OME torsions, 33x10.50 BFG muds budbuilt xmember/skid plate 2006 Subaru Forester XT 1994 Subaru SVX 1979 Mazda rx7

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode