HZJ75

gotoy · 10-21-12, 12:40 PM

Quote:

Originally Posted by hzj79lee

I think lc2 with that engine will run smooth n great! Gotoy y u have 2 kzj?

http://forum.ih8mud.com/70-series-te...1-project.html

Doing a little project on one.

cheong25 · 10-21-12, 05:10 PM

Quote:

Originally Posted by wongtsenhin

Correct, KK is famous place of modifying diesel FP.
BTW, that is nothing to mod for a NA engine FP. They do have ton of mods to Turbo FP.

You're absolutely wrong, "NO more timber in Sabah".
We're buying more trucks to haul timber woods from forest.

Only landcruiser can handle the timber sector job.
However, Vigo is gradually taking the place of cruiser due to maintenance wise and consumption.
To me, probably you can save huge on consumption.
When it comes to maintenance, Hilux keeps on getting to the workshop. The amount of $$$ save on the fuel is now paying it to the workshop workers and parts.

My 75 was from the West, Kelantan. The previous owner told me they have only 2 units of 75 in Gua Musang. Super rare truck in the West.

Wong,Sabah using original Trucks to carry Timber Log from forest but in my place all the truck look ugly...All DIY trucks

cheong25 · 10-21-12, 05:14 PM

Wong, so far is KK to tawau?

wongtsenhin · 10-21-12, 08:16 PM

Quote:

Originally Posted by cheong25

Wong,Sabah using original Trucks to carry Timber Log from forest but in my place all the truck look ugly...All DIY trucks

Mercedes Benz and Nissan Diesel are the famous of all among Sabahan. Mercedes Benz is the king of the jungle after landcruiser

Quote:

Originally Posted by cheong25

Wong, so far is KK to tawau?

There are actually 2 routes to Tawau by land. One is gravel and one is tar road. Both takes about 7-8 hours drive depend on your speed.

wongtsenhin · 10-21-12, 08:21 PM

Quote:

Originally Posted by gotoy

What you planning for my Hilux?

I would say the hilux 1kd would some how fit into a lc2, but I never heard of this being done yet.

1KZ fit into LC2 so does a 1KD.

1KD is too huge to invest into LC2.

hzj79lee · 10-22-12, 01:32 AM

Quote:

Originally Posted by gotoy

http://forum.ih8mud.com/70-series-te...1-project.html

Doing a little project on one.

will u sell the old one?

hzj79lee · 10-22-12, 01:39 AM

Quote:

Originally Posted by wongtsenhin

There are actually 2 routes to Tawau by land. One is gravel and one is tar road. Both takes about 7-8 hours drive depend on your speed.

or u can take a plane which is 45 minutes long

gotoy · 10-22-12, 01:55 AM

Quote:

Originally Posted by hzj79lee

will u sell the old one?

Eventually.

hzj79lee · 10-23-12, 04:06 AM

Wong ur rear bumper is imported into malaysia http://jrj4x4.blogspot.com/2012/02/l...er-hj7579.html

wongtsenhin · 10-23-12, 07:34 AM

This JRJ is an accessory shop at KK adjacent to kolombong highway.
Furthermore, this is an import model come with the factory rear bumper, nor do they import the bumper and sells it to the public.

This cruiser should belong to the government and only they are allowed to import.

hzj79lee · 10-23-12, 06:55 PM

ya the side window is different, it has air vent. do u fit in rubber at ur tailgate like that to avoid scratch too?

wongtsenhin · 10-24-12, 04:51 AM

Nope!
Only OEM comes with the rubber bumper on the tailgate.

cheong25 · 10-24-12, 06:15 AM

Quote:

Originally Posted by wongtsenhin

Mercedes Benz and Nissan Diesel are the famous of all among Sabahan. Mercedes Benz is the king of the jungle after landcruiser

There are actually 2 routes to Tawau by land. One is gravel and one is tar road. Both takes about 7-8 hours drive depend on your speed.

What???? 7-8hours from kk to tawau Omg....In Our place we use Nissan Diesel and fuso as engine and the axle we use MAN ...Wong,I'm jealous your 75 with 1hd heart

hzj79lee · 10-24-12, 06:46 AM

Quote:

Originally Posted by cheong25

What???? 7-8hours from kk to tawau Omg....In Our place we use Nissan Diesel and fuso as engine and the axle we use MAN ...Wong,I'm jealous your 75 with 1hd heart

what's wrong with 1hz if compared to nissan and fuso? and what is MAN axle?

wongtsenhin · 10-24-12, 05:05 PM

Quote:

Originally Posted by cheong25

What???? 7-8hours from kk to tawau Omg....In Our place we use Nissan Diesel and fuso as engine and the axle we use MAN ...Wong,I'm jealous your 75 with 1hd heart

UD truck is no longer cheap stuffs. A front cut easily cost you a Landcruiser HZJ75.

Fuso new truck is getting famous now due to the rising cost of a rebuilt truck.
What Man axle are you using? Large 13t or small 10t??
By the way, you don't have to jealous of my 75. You can serve your cruiser with 1HD as well. We definitely need a 75 with gut to carry spare parts or tires for our trucks.

Quote:

Originally Posted by hzj79lee

what's wrong with 1hz if compared to nissan and fuso? and what is MAN axle?

Nothing wrong with 1HZ and is a bulletproof engine.
Man axle is equivalence to Mercedes Benz axle .

cheong25 · 10-24-12, 05:53 PM

Quote:

Originally Posted by wongtsenhin

UD truck is no longer cheap stuffs. A front cut easily cost you a Landcruiser HZJ75.

Fuso new truck is getting famous now due to the rising cost of a rebuilt truck.
What Man axle are you using? Large 13t or small 10t??
By the way, you don't have to jealous of my 75. You can serve your cruiser with 1HD as well. We definitely need a 75 with gut to carry spare parts or tires for our trucks.

Nothing wrong with 1HZ and is a bulletproof engine.
Man axle is equivalence to Mercedes Benz axle .

The UD diesel is not cheap now a RH10 engine already cost 50k but all prefer UD engine than Fuso engine....I really don't 13t or 10t they using sometimes I curious the truck using Two low gear transfer box on the truck...better we call it three nation truck From Malaysia+Japan+German Truck...hahaha

....Wong,is 1hd engine expensive?

cheong25 · 10-24-12, 05:57 PM

Lee, the 1hz engine is unbreakable...yesterday I went to a goverment office I saw a condemn 80sseries the 1hz is already jam but the engine still look clean no leaking at all ...if can get 1hd more better can't get bully by Vigo on the road....hahaha

hzj79lee · 10-24-12, 06:43 PM

Quote:

Originally Posted by cheong25

Lee, the 1hz engine is unbreakable...yesterday I went to a goverment office I saw a condemn 80sseries the 1hz is already jam but the engine still look clean no leaking at all ...if can get 1hd more better can't get bully by Vigo on the road....hahaha

cheong i feel the pain of being overtaken by vigo too

I think this is due to small rear diff on vigo makes it spin faster. here is a link to a halfcut shop that sell 1hd http://www.kinaway.com.my/6.html. the boss quote me RM12k for 12 valve, RM13k for 24 valve.

OilHammer · 10-24-12, 07:54 PM

Well, that's too bad. I really thought I had read/heard that these were interchangeable. I know I replaced the front rotors on my 70 and now I'm wondering what I actually bought for that, because they went right on with no issues. Eventually, I will need to do the rear as well and was hoping the 80 parts would pan out.

Quote:

Originally Posted by phrogg4evr

Well, I tried to put the 80 series rotors on the 75 series axle and even with the 80 series hub, it still won't work. Two problems that I can see that stems from the difference in the rotors. The outer and the inner (PB drum) diameters are larger for the 80 series. For the overall diameter being larger, the parking brake backing plate/dust shield it smaller, so you cannot drop the 80 series rotor in without either bending or cutting off the lip of the backing plate. Second, the center hub/drum area is also a larger diameter, which may be enough that the parking brake might not grab the rotor.

I think you'd have to swap over the backing plate and maybe parking brake bits off an 80 series axle to fit the 80 series rotors on. Too much work just to fit an 80 series rotor when you use the same caliper

Fun experiment, too bad it didn't pan out

gotoy · 10-25-12, 01:22 AM

Quote:

Originally Posted by hzj79lee

cheong i feel the pain of being overtaken by vigo too

I think this is due to small rear diff on vigo makes it spin faster. here is a link to a halfcut shop that sell 1hd http://www.kinaway.com.my/6.html. the boss quote me RM12k for 12 valve, RM13k for 24 valve.

The 12v is more robust than the 24v?