full-floater/disc-brake problem

[mikeyT]

Hi, all.

On my '85 '70, I have a stock Toyota full-floater rear axle w/ stock disc brakes, the whole axle originally from an early-90's 75-series pickup.

It's now the time to think of replacing rotors and pads, maybe calipers. Would anyone know the part numbers of these items? Any chance that these could be the exact same rotors, etc. as on some 80 and 100-series LCs? (I can hope, right?).

I used to have the numbers noted down but I can't (and probably won't) find them.

Thanks!

[mikeyT]

Don't anyone do any more work! I dug up the PNs with the help of Ens in Saskatchewan, the experts. Rotors and pads on their way. Thanks anyways.

It turns out that the axle is from a '97 HZJ75, something long forgotten by me.

All the same, would anyone know whether these parts are interchangeable with that era of 80 or 100-series? If so, in the future I'll be able to get NAPA parts.

[roscoFJ73]

Originally Posted by mikeyT

Don't anyone do any more work! I dug up the PNs with the help of Ens in Saskatchewan, the experts. Rotors and pads on their way. Thanks anyways.

It turns out that the axle is from a '97 HZJ75, something long forgotten by me.

All the same, would anyone know whether these parts are interchangeable with that era of 80 or 100-series? If so, in the future I'll be able to get NAPA parts.

Try looking up DBA's site and cross referencing their part #
It appears the FJ cruiser have a rear disc that is the same in 5 dimensions as the 90- rear disc in a 75 series.
It carries a different part# in their catalog though
Untitled Document

[lshobie]

Hi Mike, you should have called me - I have the EPC here to get part numbers, I think I might have some rotors and pads as well - but can't say for sure.

I am pretty sure they aren't the same as the 80 series here - but they are the same as the HDJ81 series for certain years - have to cross the numbers on the EPC. ENS is your best bet though - and OEM is the way to go for rotors.

SO - you gonna ctually drive that truck???

Starting the ARB front locker install tomorrow - wanna come over and help!

[mikeyT]

Originally Posted by lshobie

Hi Mike, you should have called me - I have the EPC here to get part numbers, I think I might have some rotors and pads as well - but can't say for sure.

I am pretty sure they aren't the same as the 80 series here - but they are the same as the HDJ81 series for certain years - have to cross the numbers on the EPC. ENS is your best bet though - and OEM is the way to go for rotors.

SO - you gonna actually drive that truck???
Starting the ARB front locker install tomorrow - wanna come over and help!

Thanks, Lou.

I've been driving that truck daily for a long time; I've also ben neglecting it daily. Can't make it over; just got in from a busy evening shift and I'm back at it again tomorrow eve.