IH8MUD Forums - View Single Post

yooper · 11-30-03, 07:30 PM

Kroil rocks. Toyopeen (Toyota High Performance Penetrating Lubricant) rocks. Compared to these two products PB Blaster, WD40, Liquid Wrench, etc all suck badly.

Here's my current technique: Clean the fastener in question with some brake cleaner or carb cleaner to blast away grease and dirt - this allows the penetrating oil better access to the threads. If it's really nasty go at it with a wire brush and blast it with cleaner again. Apply Kroil and wait (however long you want - 10 minutes, an hour, overnight, whatever). Apply Toyopeen and wait. You will be amazed - the combination of Kroil and Toyopeen is like magic.

11-30-03, 07:30 PM	#4
yooper To all a good night! Join Date: Sep 2002 Location: Everywhere TLCA# 13011 Posts: 2,284	Kroil or Liquid Wrench? Kroil rocks. Toyopeen (Toyota High Performance Penetrating Lubricant) rocks. Compared to these two products PB Blaster, WD40, Liquid Wrench, etc all suck badly. Here's my current technique: Clean the fastener in question with some brake cleaner or carb cleaner to blast away grease and dirt - this allows the penetrating oil better access to the threads. If it's really nasty go at it with a wire brush and blast it with cleaner again. Apply Kroil and wait (however long you want - 10 minutes, an hour, overnight, whatever). Apply Toyopeen and wait. You will be amazed - the combination of Kroil and Toyopeen is like magic.