contour fan wiring, quick question

VTCruiser · 06-27-08, 02:56 PM

I picked up a used e-fan from a '99 v6 contour and have a question about wiring it to a delta controller. Do i need anything other than the power in and ground wires? There are a couple other wires and a coil thing mounted to the bottom of the shroud. I'd like to remove all the unnecessary wires, but don't have the controller yet...thanks!

iaintscared1969 · 06-27-08, 03:52 PM

Just hot and ground to the motor. Do not use the resistors that is why Ford got a bad wrap on burnt out fans.

06-27-08, 02:56 PM	#1
VTCruiser IH8MUD Lifer Join Date: Sep 2003 Location: Vermont TLCA# 15472 Posts: 2,691	contour fan wiring, quick question I picked up a used e-fan from a '99 v6 contour and have a question about wiring it to a delta controller. Do i need anything other than the power in and ground wires? There are a couple other wires and a coil thing mounted to the bottom of the shroud. I'd like to remove all the unnecessary wires, but don't have the controller yet...thanks! __________________ Project Overland Build - Updated 8/1/08 UpstateCruisers.net "Goes where the golden trout are."

06-27-08, 03:52 PM	#2
iaintscared1969 RT Customs Vortec Junky Join Date: Apr 2006 Location: Irving, Tx. TLCA# 17528 Posts: 1,662	Just hot and ground to the motor. Do not use the resistors that is why Ford got a bad wrap on burnt out fans. __________________ Cool place to get all the cruiser crap you could want! http://cruisercrap.com 1989 FJ 62 4" Hell Creek Suspension, Bridgestone Duellers 33X12.50, Hummer sliders modified of course, HI-Lift Jack, Pioneer Equipment Rack, HFS 2.5 Shackles, Defender Light rack, 4 KC Rally 800 series lights, All new steering components,First responder kit, and a whole lotta stickers! Member: LSLC, DFW and Austin, BSLCA

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode