Finally got my 35's - Page 2

fjdemon · 03-29-08, 12:34 AM

I read that 3.75" backspacing will rub that ideally go with 3.5" Where do you find rims with that backspacing? Are there any negatives about adding spacers? So what wheels can you get that won't rub in Black and do not need spacers? thanks

rover67 · 03-29-08, 02:52 PM

yup, i will more than likely rub with the 3.75" backspacing wheels, that's why spacers are going to be in the mix.

wheels with the 3.75 backspacing are easy to get, any less is hard to find. I looked for a while and while custom wheels are an option, i chose to stick to my 34 dollar a peice steelies and run spacers. way to cheap not to.

plus the wheels i got fit over my 4-runner calipers... others may not.

03-29-08, 12:34 AM	#31
fjdemon El Duderino Join Date: Feb 2007 Location: Currently the middle east, but Georgia is home Posts: 485	I read that 3.75" backspacing will rub that ideally go with 3.5" Where do you find rims with that backspacing? Are there any negatives about adding spacers? So what wheels can you get that won't rub in Black and do not need spacers? thanks __________________ "WOW... That must've been some pants-poopin' impact ! .... -Spike Strip" Last edited by fjdemon; 03-29-08 at 12:35 AM. Reason: typo

03-29-08, 02:52 PM	#32
rover67 IH8MUD Regular Join Date: Sep 2006 Location: Lafayette, Co Posts: 393	yup, i will more than likely rub with the 3.75" backspacing wheels, that's why spacers are going to be in the mix. wheels with the 3.75 backspacing are easy to get, any less is hard to find. I looked for a while and while custom wheels are an option, i chose to stick to my 34 dollar a peice steelies and run spacers. way to cheap not to. plus the wheels i got fit over my 4-runner calipers... others may not. __________________ 85 FJ60 240k H55, LM7, HomeBrew Bumpers, sliders, SUA and 35's

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode