Hi Boogie74
Cant remember all now, but will advise accordingly, but regarding this .............
Quote:
|
Would have pulled out if it had got close to 1050F.
|
I think post turbo, you should not let it go higher than 800deg C, seeing that you cool about 200deg C with the turbo.
Mine is running on 33" with intercooler, pre turbo @ ± 5bar boost:
Pre-pump calibration was ±790degC at cruising speeds going uphill in 5th or 4th, not much load.
After calibration it is below 760degC at same conditions as above.
Can't seem to get my boost higher, had the actuator rod modified so that I can adjust it, can't get anything more now. Cruzer pulls well, no need for more feul now while I can't get more air into it.