|
I grabbed a canister from the junkyard and hooked it up just to make the startup as easy as possible. Well It turns over and pops off but wont stay running. I think the timing is off still or its a computer issue. On a scary note it shot a flame out the throttle body which makes me really think the timing is off. I'm going on vacation So I guess I'll get to trouble shoot this when I get back. I really hoped I could get this going before I left but thats how it goes. Any suggestions? I put the cylinder at top dead center hooked up the wires according to the casting the first time and nothing would happen, so I pulled the dizzy flipped it 180 and also set at top dead center and now it will sputter and or pop off. The strange part that makes me think it could be the compute is itl pop a little then i'll stop give it a little gas and then itl sputter once a little bit. What I don't get is every once and a while in between starting attemps I can give it some gas and the injectors will pump in some fuel and then it really pops off. I notice their pumping because of the sound they make. It will only do this in between every few starting attempts though... Hmm.. any suggestions. It does sound mean when it does pop off though I'm going to like a v8.
|