Quote:
Originally Posted by Tools R Us  Most good greases can take 200F+, so I doubt that it's heat related. Most color change is from contamination, like not cleaning all of the old grease out, some moly migrating from the bushing, birf area, etc. Most times not an issue as long as you have good preload and the temps are close side to side. |
Thanks again for the information. I cleaned the hub pretty well with mineral spirits during the rebuild (installed new rotors so I had the hub broken down completely). I guess I may have some contamination from the moly grease. If the grease is still intact and has not turned black I will just keep on driving.
Thanks again,
Riley