|
I will be using a filter relocation kit.
With the SC400 oil pan I will not need to move the panhard, and clearing the diff will be much easier. I will still need to modify the steel part of the pan slightly, but only ever so slightly, much less than the stock pan.
I am using a 2005-2006 4x4 ECU, although now that I think about it, a 2wd may have been a better option. Unfortunatly the harness was cut on this motor. However I do have a 2002 harness that I can use, I just hope the ecu connectors are the same. If the plugs are the same, I will run a small seperate harness for the VVTI and throttle, and any other sensors that are required.
|