Quote:
Originally Posted by SuperRunner
stock FJ80 trans.
Trying to make this swap as simple as possible and repeatable. That way I can have pre-made mounts, and a bellhousing/flex plate adapter. This swap would of course require welding, and modified drivelines, but everything else should be bolt on custom parts.
|
Just FYI this will not work as the VVTI engine was not offered with a 4 speed tranny. This will cause some codes.
The a343 (if that is what you have) does not have a line pressure solenoid. Line pressure is controlled by a throttle valve driven by a cable connected to the throttle plate. Your VVTI tundra engine is drive by wire.
You will need a transmission from a 2003-2007 LC100 to work with that engine. Wiring is a little more of a issue when running a Tundra harness and ECU.