Quote:
Originally Posted by Randy88FJ62
Where is the cheapest place to get an 80's pittman arm? I just went through your thread and post on this Drew and it looks like a good substitute.
|
Probably a junk yard. They are available new as well.
If you want an FJ60 Pittman arm bored for 1 ton GM ends, I'll send it down to you. That at least gets you mobile while you look for an 80 series Pittman, assuming you use the GM 1 ton stuff. If you use 80 series ends, you best bet might be the Pittman arm from Marlin, that has a little less drop than FJ60/62 and comes bored for the 80 tie rod end. I think just the Pittman is about $75 or so.
Got your PM on the fuel tank. great, I want it, not in a hurry. (Looking at 2FE in the FJ60 and that would be the easiest way to get a good fuel pump, and better than a frame rail mounted pump.
Post a pic of the knuckle/steering arm set up. That's kind of critical to your operation here!
__________________
Andrew
1971 FJ-40 Rubicon tested, 2F powered, SM420, some mods
1976 FJ40 Rusting slowly in the back yard
1984 FJ-60 H41, Toybox, 4.11, SOA, twin sticks and more
1989 FJ-62 125k-Stock, daily driver
1997 FZJ-80 Driveway queen, with door dent