Quote:
Originally Posted by LUV24BY
Great article!! Thanks for the tip, I added it to my favorites!! I don't hear the window motor or regulator moving at all when I do the switch. I took off the front DS main switch assembly, and all looked good.
I guess I will have to try thi, but again - not knowing where the window motor is I may have to price out the Dynamax stuff to replace the stuff I take off. I would hate to have one door without and noisy and the rest quiet and with Dynamax.
John |
I had a similar prob with the passenger side window. From the driver's control, it sometimes wouldn't do anything. Luckily, I had an extra passenger window switch. I swapped it out. The driver's master was fine, it was the passenger switch which turned out to be bad.
I believe the window motor is in the area just above the door speaker. If you look closely at photo #DSC03422 in the link, you will see there are three bolts which form a triangle above the speaker. IIRC, these three bolts secure the window motor.
Best of luck. It's always a lot of fun tearing into a door panel. Whenever I have to go where no other has gone before, I secretly hope I'll find money or gold - but it never happens.