I am using Johnny Joints on one end, but wanted to use poly bushings on the other end to help with some dampening from shock load. The Links I got were premade and taped for LH and RH. So I made up these to allow for them to still be adjusted when installed:
Front Uppers Mount/truss:
Links in place:
Still have to finish the lower axle mounts and make a small truss for the passenger side of the axle. Then I can make the air shock mounts and move on to chopping the frame up!!!
Air Shock Mount:
On the ground, ready to cut the frame.
Before:
After:
DOM here and ready to go! Starting tube work on Sunday.
