Quote:
Originally Posted by WarDamnEagle
I think he makes very nice stuff but I have to disagree on the cost. I spent $125 for the ECU, swtich and pigtails plus another $40 on wire.
Unless I'm reading his website wrong, the 12Voltguy switchs are $44.95 each and the wiring harnesses are $99.00 each. With shipping, that's more or less $300 dollars or roughly twice what I spent.
Correction: I did have to buy the 2 factory harnesses but they were only $30 each. Not sure if you need those with 12Voltguys setup.
|
note: you did a nice job
Thought I would answer for others that may want to purchase, my kits are an option
I have a banner add over here, just not on here much
price is $44.99 for a panel,=$8.99 shipping not just a switch, I sell switches & LEDs separately if wanted
harness is $99, std or HP 11' OR 15' longer or shorter if needed
no need to buy a factory shorty harness for $39+ship and cut it up.
Total 1 kit $152.98
plug-N-play, it's just that easy
I have been making dual kit deals at $275-$14.99 shipping
no wiring involved really, just tap in power
I buy the factory plugs at the diff & put them on, there are no splices, harness is 1 piece.
no relays involved, been doing these for years and have not seen the need, amp draw when I test these, & I test each complete unit on my 4runner before shipping, amp draw less then 3a
I suggest a 10a fuse in case a load on locker draws more
on the bench a motor draws under 2a
I made this kit to save people the hassles of splicing wires, it's as easy as plugging in 4 wires at the switch, & connecting the 2 plugs at the diff
