|
81mm,,,,, just to be clear i'm looking for the overall shaft length from the face of the transmission case. that number is the stickout as you lay a straightedge on the bellhousing?
thanks dougal i figured you would be on top of it, if you can get an overall length i'd be i your debt as i dont have a tranny or bellhousing for my own measure.
i'm working with a machinist to mill a new bellhousing that will mate an H55F tranny to the engine, if it works out we'll then have a go at the easy part, re drilling the isuzu flywheel for a cruiser pressure plate.
__________________
Clay
75 BDJ55- biopig
|