Quote:
Originally Posted by weak-link
|
AAAAAAH!
Thats a great write up!
I have a spare set of axels (birfs/ inners) that I carry in the back of the rig, but Ive never been able to seperate the two. Hoestly, I had never tried all that hard. I always figured on the trail Id just slam the whole shebang in!
Ive not been able to get to the inner c clip on the inner splines.
How is this accompished?
So the weld has to filed down flush with the rest of the spline obviously...
There wouldnt be any play at the distal ends of the assy, where the inners insert into the birf, or is there a tack there as well, or is it the outer c clip that maintains IT'S position?
Chicago