View Single Post
Old 06-26-08, 05:18 AM   #146 (permalink)
matt.mcinnes
Site Addict
 
matt.mcinnes's Avatar
 
Join Date: Jan 2006
Location: Melbourne
Posts: 1,980
I've been testing NOT Hooning

Pre inter cooler cruising temp is 50C/122F
Full boost rises to 82C/180F

Post inter cooler cruising temp is 25C/77F
Full boost rises to 31C/87F

Note the heat rise was only on the second run first run showed a 1C drop post intercooler. After 5 runs no post intercooler temp over 31C/87F

Ambient 12C/53.5F

Calculated Temps are spot on too
Quote:
Spent the evening calculating Turbo outlet temps for the Garrett GT3082R @ 70F/21C ambient and from what I can work out at 9psi the outlet temp should be around 180F/82C at 15psi the outlet temp rises to 227F/108C.
The photo of the graph below shows 2nd to 3rd to 4th

The Red line in the top graph is Pre intercooler temp, I am using the external map sensor input to read it so the scale is wrong, you have to multiply it by 1.82
Yellow is correct, Post intercooler. hope that makes sense.



__________________
If the wife's not complaining your not spending enought time with your 40!
2F+3FE+T+I-3F=2F-ETI
THE MULE @ 400hp max Est @ 15PSI
DYNO'd at 8PSI 181kw/244hp & 560Nm/413ftlb @ the RW 8th Dec 08
EST @ FLY 283KW/379HP


Links
Sponsored by OZZIEWEBHOSTING
Mac's Space
On the rev limiter

Advanced (HB) Intercoolers

Last edited by matt.mcinnes; 06-26-08 at 08:08 AM.
matt.mcinnes is offline   Reply With Quote