|
The radiator we're using is from Ron Davis Racing. It should do fine (however is still yet untested).
We hauled the pig down to have an exhaust bent yesterday. We asked that it come in two pieces, and have an exhaust bung welded in for the O2 sensor. We came back to pick it up, only to find a 1 piece, welded exhaust with no bung-hole!! My list of vendors/shops to stay away from grows by one more.
After filling all the gear oil, we found that our Toybox leaked. It's nice to know that everything (except the welded exhaust) comes off as easily as it went on. After pulling the toybox/transfer back off the transmission, it was found (suspected) that the leak was coming from the two bottom bolts on the toybox. We'll confirm this when we refill everything today.
When we referenced the ramjet instructions for O2 sensor placement, it recommended that we place it as close as possible to the cylinders, as it needs the hottest air possible to get good readings. Our initial thoughts were to place it at the "Y" pipe to sample both banks, but the instructions led us to this conclusion instead.
|