IH8MUD Forums - View Single Post

crushers · 01-13-05, 07:03 AM

since it is a 2 piece you need to disassemble the unit. by the time you have the back half off and the guts removed you only have 3 17mm left to remove the front half so i would say pull the front half off, it makes getting the front output bearing out easier...
make sure you drain the tranny before starting this since once you remove the front half the fluid will come out anyway.
just my suggestion

01-13-05, 07:03 AM	#3
crushers IH8MUD Lifer Join Date: Feb 2004 Posts: 9,815	since it is a 2 piece you need to disassemble the unit. by the time you have the back half off and the guts removed you only have 3 17mm left to remove the front half so i would say pull the front half off, it makes getting the front output bearing out easier... make sure you drain the tranny before starting this since once you remove the front half the fluid will come out anyway. just my suggestion __________________ pulling this info out of my ass so take it with a pound of salt "People are poor because they don't spend money wisely, tough sh!t !!! " John Galt 09/22/08 "educate yourself. Sorry if that seems too blunt." John Galt 11-01-08 Wayne in Ontario http://www.ivoac.ca join today