[BigyellowFJ]

Its been about a year since the install but here goes. I bought the 2 FE at Orchard Supply Hardware, thats a general hardware store that has a camping / boat isle. So I think lots of recreational, hardware or sporting good stores may have them. The FE is made Kidde, the well known company. I measured it and its 11 inches from top to bottom. As for the bolts, I used tapered phillips head screws about 1 inch long. As for the size, look at the FE mounting bracket you get with the FE to see the hole size. Get a 1 inch fender washer to place on the back side of the door panel with the nylock nut . BEFORE you drill a hole, place it where you think it will work and have someone move the seat in the normal positions that you use. Remove the bottle holder in the arm rest on the dorr and it will give you access to what you need. Takes about an hour for both sides. Hope that helps !