[LukeZero]

Originally Posted by pappy

I tried several types of disks when I stripped my FJ40. I really like the 4.5" bristle disks. Works best on flat surfaces, but some contours were not a problem. I only used one because of cost and availability. I could get little disks at NAPA, but not the 4.5" locally.

Eastwood wants like $30 for the one pictured above. Industrial supply houses have them for something around $12.

For rust and paint removal I really like 36 grit 4 1/2 flap disks in my Metabo angle grinder. Good control, not very expensive and you can grind down welds with the same disk.