|
If you are using the 1A towers from Yakima, you can "shim" the mount by installing a shim material, aluminum or hard plastic between the tower and the top silver mounting hole. It will require a longer bolt (longer by the thickness of the material used for the spacer) then you could customize the level without much issue.
Think the top of the clamp and the bottom as two pieces you could adjust the height by adding a spacer between the two with a longer bolt. 1/4" would be easy!
Drew
__________________
Drew F.
Rising Sun 4x4 Club
76 FJ40, 85 fj60 Engine and Ignition, 35" MTR's, Warn 8074, 4" of lift TPI, snorkeled, racked, Mini-truck P/S... and sometimes running.
Friends don't let friends drive Thornbirds...
My camping trailer build up thread.
|