Quote:
Originally Posted by smtyblt
1. it is possible u emptied out the master cylinder and it now has an air pocket
2. double check your bleeders and make sure they are not clogged
3. if all else fails fill master break the bleaders loose and walk away for 30 or 40 minutes they will eventually self bleed if there is a pocket.
4. worst case your master took a **** and it is internally bypassing ( I dought it thow)
|
x2 fill the master up and open your bleeders walk away and fluid should flow. if no fluid flows check the lines for any crimps if that hard line to the caliper gets in a bind when you screw the line back in you can twist the line internally effectively sealing it off. i almost did that when i put my new calipers on.
just a thought
good luck