|
If the dizzy was off 180, it would not run. Check the timing. WD40 is NOT a good idea for finding vac leaks. Use carb cleaner or starting fluid. Make sure you have the proper carb base gasket. Some carb / intakes combos require an open gasket, others need one with 4 holes, 1 for each port. The instructions with the intake will tell you what you need.
Do not tighten the rockers, you may have them too tight now. Spin the pushrod between your fingers, and tighten the rocker until you can not spin the push rod, that's it, no more. You do this when both the intake and exhaust valves are closed. You will need to rotate the engine for each cylinder. I assume you have hyd lifters, and not solid.
Shawn
__________________
65 V8J45 SWB, 70 V8J40
|