Try this link
The Best Blend for Diesel Fuel - Topic Powered by eve community
It was started by John Galt (I assume you are the same?) It has some good information and there are alot of other threads on that site that will help as well. I am about to do the same but am planning on using 50-75% clean, dry WVO. I have added some inline fuel heaters to help thin the blend even further. The heaters I am using are electric and coolant heated, once the engine is up to temperature the electric heat is switched off and the coolant heats the fuel. I have tested various blends and have found that 25% gas mixed in with WVO is very close to the viscosity of very cold diesel. Assuming most IP's a built to handle cold diesel I should be ok.
Good luck
Rusty