IH8MUD Forums - View Single Post

85 SA Toy · 04-07-08, 05:26 PM

So yesterday I bobbed the bed, a whole 13 inches.....
8 hours of hard strenous work- Thanks to my two brothers, I couldn't have done it w/out your help-

A small write up- tools needed

Sawsall- a corded or 28 volt unit

Welder- A mig welder

Plasma Cutter- For cutting frame

Grinder- For grindng welds and finishing body work

8mm, 10mm, 12m, 14mm, 17mm wrenches, ratchet and sockets

Block Sander

Bondo Filler

Four to five metal cutting blades for sawsall

Assorted sanding grits and grinding disk- from coarse to fine

That is a list of all the big things- but you get the point-

On with the pics:

Cutting Off Tailgate/Light Setion

The Second Cut

Bed Cut Off Prep For Frame Cut

Taching On The Tailgate Section

Cleaning Up the Welds W/grinder

W/Bondo Filler

04-07-08, 05:26 PM	#1
85 SA Toy IH8MUD Regular Join Date: Nov 2006 Location: Whittier, Ca Posts: 266	13 Inch Bed Bob So yesterday I bobbed the bed, a whole 13 inches..... 8 hours of hard strenous work- Thanks to my two brothers, I couldn't have done it w/out your help- A small write up- tools needed Sawsall- a corded or 28 volt unit Welder- A mig welder Plasma Cutter- For cutting frame Grinder- For grindng welds and finishing body work 8mm, 10mm, 12m, 14mm, 17mm wrenches, ratchet and sockets Block Sander Bondo Filler Four to five metal cutting blades for sawsall Assorted sanding grits and grinding disk- from coarse to fine That is a list of all the big things- but you get the point- On with the pics: Cutting Off Tailgate/Light Setion The Second Cut Bed Cut Off Prep For Frame Cut Taching On The Tailgate Section Cleaning Up the Welds W/grinder W/Bondo Filler __________________ Frank... 85 Hilux- 3 inch Downey kit (up front), 1 1/2 inch cantilever shackles (rear), locked rear, 33 BFG AT'S And a list of mod's still to be done!