IH8MUD™ Forums - View Single Post - Help with 1 ton axle choice for fzj80 build

Dusty · 01-21-08, 06:43 PM

ya think that /l upper link on benders truck would hold with 6000+ lbs of heavy assed 80 series?

Im only looking for 12-14" of beefy travel. The 42's will do the rest. radius arms run on a 40" arm should have minimum bind.? Looking more on pirate. But how about summit joints at the frame and at the Y (where upper and lower links seperate) and these

Poly Bushing with Billet Threaded Stud

or even better these
Jeep Large Super Ride Bushing Kit :: Bushings :: Suspension Joints :: Poly Performance Inc.

at the axle (upper and lower)

attached to these brackets
Flat bottom radius arm mounts

01-21-08, 06:43 PM	#126
Dusty IH8MUD Lifer Join Date: Oct 2004 Posts: 1,487	ya think that /l upper link on benders truck would hold with 6000+ lbs of heavy assed 80 series? Im only looking for 12-14" of beefy travel. The 42's will do the rest. radius arms run on a 40" arm should have minimum bind.? Looking more on pirate. But how about summit joints at the frame and at the Y (where upper and lower links seperate) and these Poly Bushing with Billet Threaded Stud or even better these Jeep Large Super Ride Bushing Kit :: Bushings :: Suspension Joints :: Poly Performance Inc. at the axle (upper and lower) attached to these brackets Flat bottom radius arm mounts __________________ 97lx450 4" slee/j's, sliders, bumpers, 3" exhaust, custom turbo, HG pm/Valve job/seals, sweet custom skid plate, Sleeoffroad parts, Buys oe parts from Cruiser Dan used to have 37" swampers.. 1 tons and 42's pending..... Budget Blown 98 100 series. rear locker. 2008 6.7L dodge 2500 quad cab Last edited by Dusty; 01-22-08 at 12:04 PM.