Thread: PoorRunner
View Single Post
Old 12-19-07, 12:39 PM   #8 (permalink)
GRM
Profesional at Something

 
GRM's Avatar
 
Join Date: Nov 2003
Location: Irvine, Ca.
TLCA# 16721
Posts: 351
Last night wasn't very productive.

I tried to swap the fuel tank pickup out for the correct one. I had pulled my 12 gallon tank for a 19? gallon out of an 89 4runner. The fuel pickup on the 19 gallon was broken, so I have been using my 12 gallon one. Went to install it and found that the 89 4runner sending unit bottomed out on the bottom of the tank, and that the 12 gallon one is .625" from the bottom. Only idea I have is that the tank is dented.

Then I tried to put the radiator shroud on that I had ordered up from Toyota of Wellesley. Low and behold the shroud for an 85 4runner auto doesnt fit the 3 core radiator I have. Saw will come out today.

At least the headlights are bolted up. The H4 bulbs are really nice, and put off some nice light. Although they are loose in the buckets. I thought of putting foam tape in the back to snug them up; although I am afraid the foam will burn. Does anyone have an idea on how to fix this?



GRM is offline   Reply With Quote