| The sleeves for the Laminova cores have been cut
The 10mm plate is marked out and 4 holes will be machined through the plate. 10mm of each end of the Sleeves will be machined down to slot into these holes for a flush fit with the other side of the plate.
Finished size should be about 140mm X 177mm X 376mm
__________________ If the wife's not complaining your not spending enought time with your 40! 2F+3FE+T+I-3F=2F-ETI THE MULE Est @ +400hp @ 15PSI DYNO'd at 8PSI 181kw/244hp & 560Nm/413ftlb @ the RW 8th Dec 08
EST @ FLY 283KW/379HP Links Mac's Space  On the rev limiter 
Advanced (HB) Intercoolers
Last edited by matt.mcinnes; 12-06-08 at 01:26 AM.
|