[REZARF]

After the spring hanger dilemma I was on to mounting up the springs. Short little guys... I can see it bouncing now!

This was a simple as it looks, I had Randy at www.abctrailerparts.com leave my spring perches off so I could put them right where I wanted them, and as it turns out, this was a great idea.

Once I got the axle centered over the chassis and springs it was time to mark the spring perches for welding. However, I didn't clean the finish off the axle before mocking it up (do this if you can before ). Then I realized if I used a marker, it would just get sanded off, so I pulled out a spring punch/awl and outlined the axle to perch overlap... worked out great.