View Single Post
Old 06-03-07, 03:12 PM   #1 (permalink)
WristPin
Site Addict

 
WristPin's Avatar
 
Join Date: Sep 2005
Location: The NW, Cascade Mountian Range
Posts: 2,395
Massive corroisin due to inferior coolant

after 190,000 mile my 22RE blew its headgasket.

after removing the exhasut manifold, i saw it was wet in the #1 hole and #2 hole.

after removing the head and inspecting the head gasket i saw that the metal has delaminated around the round part near the combustion chamber of the #1 hole.

well why did #2 blow out coolant too?

because the green coolant that was in there ate away the metal.
i had changed out the coolant less than 10 months ago. but i did use green. shame on me. I have owned it for about 15 months. and based on the amount of stock parts on this truck and the overall lack of care this truck had before i owned it, I guess the coolant hadnt been changed if ever in the last 8 years.

please use the right coolant, OEM red Toyota coolant.



#1 hole. not horrible wear, but still bad.


#2 hole. very bad corroison on the exhaust side


a close up of the cavity

__________________
Wristy
Quote:
Originally Posted by cruiser88 View Post
Jebus...
Quote:
Originally Posted by cruiser88 View Post
I like it when I can go out on the porch buck naked ...unroll it and take a wizz without somebody saying ......look john is alive and well
22RE Tech hotline- check the FAQ
WristPin is offline   Reply With Quote