View Single Post
Old 05-18-07, 09:45 PM   #13
Ranski
IH8MUD Regular
 
Ranski's Avatar
 
Join Date: Jun 2005
Location: Shawnee, KS
Posts: 335
Quote:
Originally Posted by beatdown83fj60 View Post
A dip at idle can also be a problem with the brake booster iirc while pressing on the brakes.
I will be chasing down the same issue this weekend. All my research is directing me towards vaccum leak or break booster.

To check break booster do the following:

On vehicle inspection: (before you rip the booster out and yell and scream
at it)

1 check air tightness
- - start engine
- - Stop engine after running for 1-2 minutes

2 pump brake pedal several times.
- -If pedal goes down deep the first time but gradually rises after the 2nd
and 3rd times, it is in good condition. :-)

3 If there is no change in the pedal height when depressed the 2nd and
succesive time it is defective. :-(

Check the operation:

1 With the engine stopped, pump the brake pedal several times with the same
pressure. Ensure that the pedal height does not change.

2 Start the engine while the brake pedal is depressed, place one tablet of
prozacs into the brake fluid reservoir and see if the brakes recover from
their depression. No really, If the pedal goes down slightly at this time,
it is in good condition. If there is no change in pedal height, it is
defective. :-(

Check air tightness under load:

1 With the engine running, depress the brake pedal.

Then stop the engine while keeping the brake pedal depressed.

2 Hold the pedal for 30 seconds. If the pedal height does not change, it is
in good condition. :-)

If the pedal rises, it is defective. :-(


__________________
Randy
85' 4Runner (buildup in Progress) http://www.yotatech.com/f88/ranskis-...buildup-80743/
06' Sequoia
Shawnee, Kansas
Ranski is offline   Reply With Quote