IH8MUD Forums - View Single Post

FRIZZLEFRY · 04-13-07, 08:01 AM

I dont think I will have any cooling problems (I hope

) The rad in the Chevy was a 2 core,about 10" or so wider,but the electric fan I had on it only covered about 75% of it.So Im thinkin a fat two core aluminum rad with 100% coverage with the shroud I made should do the trick.

I went with these fans bacause of their height.From the snout on the water pump to the rad is about 3.5".All of the good CFM single fans are 4+ tall.

That shop is kick ass

I would have a hard time with this project without it.

Chris

04-13-07, 08:01 AM	#107
FRIZZLEFRY IH8MUD Regular Join Date: Oct 2006 Location: Clovis,Ca Posts: 340	I dont think I will have any cooling problems (I hope ) The rad in the Chevy was a 2 core,about 10" or so wider,but the electric fan I had on it only covered about 75% of it.So Im thinkin a fat two core aluminum rad with 100% coverage with the shroud I made should do the trick. I went with these fans bacause of their height.From the snout on the water pump to the rad is about 3.5".All of the good CFM single fans are 4+ tall. That shop is kick ass I would have a hard time with this project without it. Chris __________________ Just a little more Chevy than most Cruisers The Woohoodilly-69 FJ55,350/465/203/205,Dana 60 w/ARB,Dana70 w/Detroit,5.86s,on 42" IROKs The Chacha-08 FJ Cruiser,Sandstorm,all stock for now