Who's going to be the first to mod their 200? - Page 2

uzj100 · 03-12-08, 08:28 AM

Slee - Please post some pics.

sleeoffroad · 04-15-08, 01:41 PM

Another teaser shot

macneill · 04-15-08, 01:43 PM

Sweet Geesus!

How close is the nearest Toyota dealer to you?

And can I have it delivered to your shop...

Quote:

Originally Posted by sleeoffroad

Another teaser shot

Tapage · 04-15-08, 01:56 PM

What do you plan to use to cover these huge section over the steel where the factory fancy bumper cover with plenty of useless plastic .. ?

Damn .. this never ends ..

sleeoffroad · 04-15-08, 02:29 PM

Quote:

How close is the nearest Toyota dealer to you?

About 5 miles.

Quote:

And can I have it delivered to your shop...

Sure.

sleeoffroad · 04-15-08, 02:32 PM

Quote:

Originally Posted by Tapage

What do you plan to use to cover these huge section over the steel where the factory fancy bumper cover with plenty of useless plastic .. ?

Damn .. this never ends ..

We are planning to use the stock bumper and cut it. We will see how that goes.

We are under the gun to get this done for an upcoming trip. So it might not be the final option. Neither is the design of the bumper.

The good news is we will have production SliderSteps in about 3 weeks.

chimyz · 04-15-08, 03:08 PM

Any pics or info on the slider steps...that would be something I am very interested in.

sleeoffroad · 04-15-08, 03:10 PM

As soon as I get them from the powder coater and install them I can take pics.

twstrchasr · 04-15-08, 04:12 PM

Anything going on with the front end ? Pix ??

sleeoffroad · 04-15-08, 04:59 PM

For now we are waiting for an ARB for the front.

chimyz · 04-15-08, 09:04 PM

Quote:

Originally Posted by sleeoffroad

As soon as I get them from the powder coater and install them I can take pics.

That would be great. Any more info to pricing and availability? Are you a few weeks away?

dtt255 · 04-16-08, 01:23 AM

Quote:

Originally Posted by sleeoffroad

The good news is we will have production SliderSteps in about 3 weeks.

NICE!!

FirstToy · 04-16-08, 11:37 AM

christo,
nice buildup, have you seen the 4th gen 4Runner rear bumpers? They are tackling the same issue on the wings. 4x4Labs, CBI offroad, and some homebrew solutions for the wings.

here is one of the cleaner ones- homemade reusing the plastic
"Crozfab" rear bumper - Toyota 120 Platforms Forum

Atticus · 04-16-08, 11:40 AM

Quote:

Originally Posted by FirstToy

christo,
nice buildup, have you seen the 4th gen 4Runner rear bumpers? They are tackling the same issue on the wings. 4x4Labs, CBI offroad, and some homebrew solutions for the wings.

here is one of the cleaner ones- homemade reusing the plastic
"Crozfab" rear bumper - Toyota 120 Platforms Forum

That is a great solution. Good looking bumper, too.

Tapage · 04-16-08, 11:59 AM

Quote:

Originally Posted by sleeoffroad

For now we are waiting for an ARB for the front.

Other option I thought also require some extensive metal sheets to cover all stuff that the factory front bumper " cover "

I saw in the ARB mothntly pdf the ARB front bumper for Sequoia .. pretty close to the 200 series front ..

sleeoffroad · 04-16-08, 04:02 PM

Quote:

Originally Posted by FirstToy

christo,
nice buildup, have you seen the 4th gen 4Runner rear bumpers? They are tackling the same issue on the wings. 4x4Labs, CBI offroad, and some homebrew solutions for the wings.

here is one of the cleaner ones- homemade reusing the plastic
"Crozfab" rear bumper - Toyota 120 Platforms Forum

Thanks for the link. We spent today cutting up the bumper and it actually came out pretty good.

pint · 04-17-08, 08:14 AM

WOW! Great works as usual Christo. Can't wait to see this baby in person.

Clint_D · 04-18-08, 03:51 AM

Christo,

Are you using the four holes in the bumper to relocate the PDC? That might come in handy for wheeling.

sleeoffroad · 04-18-08, 06:47 AM

If PDC means parking sensors, yes, we are putting those back in.

sleeoffroad · 04-22-08, 11:56 AM

Sliders installed. They will soon be on the site for sale. Introduction Price is $915. As shown it has an optional stainless steel step.

The step part deck plate is now bolt on. It will either be coated with textured powder coating, or optionally you can get a stainless piece. The price is for the regular steel powder coated step.

2"x3" rectangular tube with 1.75" DOM outrigger. The slider is a bolt on using existing holes in the frame. Some rivetnuts needs to be installed. A rivetnut tool and drillbit can be supplied for $75.

This shows one of the mounting pads. The slider has two mounting pads that attach to the frame and a total of three legs per slider.

Available in 2-3 weeks.

Atticus · 04-22-08, 12:08 PM

Quote:

Originally Posted by sleeoffroad

Sliders installed. They will soon be on the site for sale. Introduction Price is $915. As shown it has an optional stainless steel step.

The step part deck plate is now bolt on. It will either be coated with textured powder coating, or optionally you can get a stainless piece. The price is for the regular steel powder coated step.

2"x3" rectangular tube with 1.75" DOM outrigger. The slider is a bolt on using existing holes in the frame. Some rivetnuts needs to be installed. A rivetnut tool and drillbit can be supplied for $75.

This shows one of the mounting pads. The slider has two mounting pads that attach to the frame and a total of three legs per slider.

Available in 2-3 weeks.

Sick.

pint · 04-23-08, 06:22 PM

Quote:

Originally Posted by sleeoffroad

Sliders installed. They will soon be on the site for sale. Introduction Price is $915. As shown it has an optional stainless steel step.

The step part deck plate is now bolt on. It will either be coated with textured powder coating, or optionally you can get a stainless piece. The price is for the regular steel powder coated step.

2"x3" rectangular tube with 1.75" DOM outrigger. The slider is a bolt on using existing holes in the frame. Some rivetnuts needs to be installed. A rivetnut tool and drillbit can be supplied for $75.

This shows one of the mounting pads. The slider has two mounting pads that attach to the frame and a total of three legs per slider.

Available in 2-3 weeks.

I stopped at Slee's to pick up a few things today and had a chance to look at the 200. SWEET! The sliders are killer!

ssmathis · 04-24-08, 08:19 AM

Quote:

Originally Posted by sleeoffroad

Available in 2-3 weeks.

Very nice. What tires and size are those in this picture? I can't tell by the tread pattern.

pint · 04-24-08, 09:16 AM

Nitto TG's I believe 285's.

NaterGator · 04-25-08, 09:31 PM

Christo,
Is is conceivable to do the 80 series step sliders with the stainless? If so would they be under $1000?

dtt255 · 04-25-08, 09:57 PM

Quote:

Originally Posted by sleeoffroad

Sliders installed. They will soon be on the site for sale. Introduction Price is $915. As shown it has an optional stainless steel step.

The step part deck plate is now bolt on. It will either be coated with textured powder coating, or optionally you can get a stainless piece. The price is for the regular steel powder coated step.

2"x3" rectangular tube with 1.75" DOM outrigger. The slider is a bolt on using existing holes in the frame. Some rivetnuts needs to be installed. A rivetnut tool and drillbit can be supplied for $75.

This shows one of the mounting pads. The slider has two mounting pads that attach to the frame and a total of three legs per slider.

Available in 2-3 weeks.

Can I place an advance order?

03-12-08, 08:28 AM	#31
uzj100 IH8MUD Lifer Join Date: Jun 2003 Location: Raleigh, NC Posts: 1,881	Slee - Please post some pics. __________________ 00 - UZJ100 - D Light Mod, 2 FRB's, Husky Liners, BFG AT KO - 285/75 R 16 03 - UZJ120L 100 Series parts for sale - http://forum.ih8mud.com/sale-parts/2...parts-etc.html

04-15-08, 01:41 PM	#32
sleeoffroad IH8MUD Lifer Join Date: Mar 2003 Posts: 3,636	Another teaser shot __________________ Christo Slee BlueBerry aka Beluga - NOW FOR SALE

04-15-08, 03:08 PM	#37
chimyz IH8MUD Junior Join Date: Nov 2007 Location: Canada Posts: 189	Any pics or info on the slider steps...that would be something I am very interested in. __________________ '08 LC 200, Nitto Terra Grapplers, K&N filter, Rear Window Tint ,3M bra & third row delete '04 Audi RS6, Bone Stock '05 LR3 - Wife's '94 LC FZJ 80, Lockers, OME 3F/2R, 34" x 12.5" Trxus MT '97 LX450 - Parts Truck

04-15-08, 03:10 PM	#38
sleeoffroad IH8MUD Lifer Join Date: Mar 2003 Posts: 3,636	As soon as I get them from the powder coater and install them I can take pics. __________________ Christo Slee BlueBerry aka Beluga - NOW FOR SALE

04-15-08, 04:12 PM	#39
twstrchasr Mors Ab Alto Join Date: Sep 2006 Location: 7th Bomb Wing TLCA# 13505 Posts: 773	Anything going on with the front end ? Pix ?? __________________ 1989 FJ62-Freeborn Red-140,000 miles 2001 UZJ100-Champagne Pearl-68,000 miles 2003 MBz CL55 AMG 1991 Range Rover

04-15-08, 04:59 PM	#40
sleeoffroad IH8MUD Lifer Join Date: Mar 2003 Posts: 3,636	For now we are waiting for an ARB for the front. __________________ Christo Slee BlueBerry aka Beluga - NOW FOR SALE

04-16-08, 11:37 AM	#43
FirstToy tlcwagons.org Join Date: Nov 2003 Posts: 3,294	christo, nice buildup, have you seen the 4th gen 4Runner rear bumpers? They are tackling the same issue on the wings. 4x4Labs, CBI offroad, and some homebrew solutions for the wings. here is one of the cleaner ones- homemade reusing the plastic "Crozfab" rear bumper - Toyota 120 Platforms Forum __________________ TLCA#14645 BRC#41798 I love cachapas! my wip I drink your milkshake!

04-17-08, 08:14 AM	#47
pint IH8MUD Addict Join Date: Jul 2005 Location: Parker, CO TLCA# 17493 Posts: 940	WOW! Great works as usual Christo. Can't wait to see this baby in person. __________________ 2000 UZJ100, OME 865, OME T-bars, Slee Diff Drop, Slee Step Sliders, TJM T3, PowerStop Cross Drilled & Slotted Rotors, 295 Terra Grapplers M101 Trailer ridding on Nittos and green primer...

04-18-08, 03:51 AM	#48
Clint_D IH8MUD Rookie Join Date: Apr 2007 Location: Houston, TX Posts: 15	Christo, Are you using the four holes in the bumper to relocate the PDC? That might come in handy for wheeling. __________________ 2000 UZJ100-70K Stock.......for now.

04-18-08, 06:47 AM	#49
sleeoffroad IH8MUD Lifer Join Date: Mar 2003 Posts: 3,636	If PDC means parking sensors, yes, we are putting those back in. __________________ Christo Slee BlueBerry aka Beluga - NOW FOR SALE

04-22-08, 11:56 AM	#50
sleeoffroad IH8MUD Lifer Join Date: Mar 2003 Posts: 3,636	Sliders installed. They will soon be on the site for sale. Introduction Price is $915. As shown it has an optional stainless steel step. The step part deck plate is now bolt on. It will either be coated with textured powder coating, or optionally you can get a stainless piece. The price is for the regular steel powder coated step. 2"x3" rectangular tube with 1.75" DOM outrigger. The slider is a bolt on using existing holes in the frame. Some rivetnuts needs to be installed. A rivetnut tool and drillbit can be supplied for $75. This shows one of the mounting pads. The slider has two mounting pads that attach to the frame and a total of three legs per slider. Available in 2-3 weeks. __________________ Christo Slee BlueBerry aka Beluga - NOW FOR SALE Last edited by sleeoffroad; 04-22-08 at 12:02 PM.

04-24-08, 09:16 AM	#54
pint IH8MUD Addict Join Date: Jul 2005 Location: Parker, CO TLCA# 17493 Posts: 940	Nitto TG's I believe 285's. __________________ 2000 UZJ100, OME 865, OME T-bars, Slee Diff Drop, Slee Step Sliders, TJM T3, PowerStop Cross Drilled & Slotted Rotors, 295 Terra Grapplers M101 Trailer ridding on Nittos and green primer...

04-25-08, 09:31 PM	#55
NaterGator Dive on in... Join Date: Oct 2006 Location: Tampa/Gainesville, FL TLCA# 18767 Posts: 1,237	Christo, Is is conceivable to do the 80 series step sliders with the stainless? If so would they be under $1000? __________________ '96 LX450, 33" Revos, OME lifted, etc, etc Love the life you live, live the life you love. -Bob Marley Selfishness is not living as one wishes to live, it is asking others to live as one wishes to live. -Oscar Wilde Firefox users, get your youtube on!