IH8MUD Forums - View Single Post

euclid · 08-25-06, 07:45 PM

It's best to modify it by cutting the bar in half and extending it. I used a piece of tube stock that I got from Home Depot. Stick the halves in, and tack weld it together.

Might also think about putting a spacer between your axle and the Load Sensing Proportioning Valve. Cut a 1" wide piece of 2" square stock. Drill some holes, and bolt it in there.

I'll try to get you some pictures this weekend.

08-25-06, 07:45 PM	#2
euclid IH8MUD Lifer Join Date: May 2002 Location: Jackson, MS TLCA# 13014 Posts: 3,137	It's best to modify it by cutting the bar in half and extending it. I used a piece of tube stock that I got from Home Depot. Stick the halves in, and tack weld it together. Might also think about putting a spacer between your axle and the Load Sensing Proportioning Valve. Cut a 1" wide piece of 2" square stock. Drill some holes, and bolt it in there. I'll try to get you some pictures this weekend. __________________ Greg Thompson 89 FJ62: Unstock.